Messages in this thread | | | Date | Sun, 25 Sep 2022 14:39:54 +0200 | Subject | Re: [PATCH] arm64: dts: rockchip: fix quartz64-a bluetooth configuration | From | Dan Johansen <> |
| |
Den 25.09.2022 kl. 14.31 skrev Lev Popov: > For "Quartz64 Model A" add missing RTS line to the UART interface used by > bluetooth and swap bluetooth host-wakeup and device-wakeup gpio pins to > match the boards physical layout. This changes are necessary to make > bluetooth provided by the wireless module work. You should add Fixes: cd414d5ac1fdeecf0617737e688a1af00858253a (arm64: dts: rockchip: rename Quartz64-A bluetooth gpios) I think, as that was the last commit that touched the gpio lines. > Signed-off-by: Lev Popov <leo@nabam.net> > --- > arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts > index a05460b92415..91908081c5ed 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts > +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts > @@ -740,7 +740,7 @@ &uart0 { > > &uart1 { > pinctrl-names = "default"; > - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; > + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; > status = "okay"; > uart-has-rtscts; > > @@ -748,8 +748,8 @@ bluetooth { > compatible = "brcm,bcm43438-bt"; > clocks = <&rk817 1>; > clock-names = "lpo"; > - device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; > - host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; > + host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; > + device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; > shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; > pinctrl-names = "default"; > pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; -- Kind regards *Dan Johansen* Project lead of the *Manjaro ARM* project Manjaro-ARM <https://manjaro.org>
| |