lkml.org 
[lkml]   [2022]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 2/2] Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
Date
This reverts commit 0f01017191384e3962fa31520a9fd9846c3d352f.

As pointed out by Ferry this breaks Dual Role support on
Intel Merrifield platforms.

Reported-by: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/usb/dwc3/core.c | 55 +----------------------------------------
drivers/usb/dwc3/drd.c | 50 +++++++++++++++++++++++++++++++++++++
2 files changed, 51 insertions(+), 54 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b3ae53be2112..695e92b8b925 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -23,7 +23,6 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/of.h>
-#include <linux/of_graph.h>
#include <linux/acpi.h>
#include <linux/pinctrl/consumer.h>
#include <linux/reset.h>
@@ -86,7 +85,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
* mode. If the controller supports DRD but the dr_mode is not
* specified or set to OTG, then set the mode to peripheral.
*/
- if (mode == USB_DR_MODE_OTG && !dwc->edev &&
+ if (mode == USB_DR_MODE_OTG &&
(!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
!device_property_read_bool(dwc->dev, "usb-role-switch")) &&
!DWC3_VER_IS_PRIOR(DWC3, 330A))
@@ -1668,51 +1667,6 @@ static void dwc3_check_params(struct dwc3 *dwc)
}
}

-static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
-{
- struct device *dev = dwc->dev;
- struct device_node *np_phy;
- struct extcon_dev *edev = NULL;
- const char *name;
-
- if (device_property_read_bool(dev, "extcon"))
- return extcon_get_edev_by_phandle(dev, 0);
-
- /*
- * Device tree platforms should get extcon via phandle.
- * On ACPI platforms, we get the name from a device property.
- * This device property is for kernel internal use only and
- * is expected to be set by the glue code.
- */
- if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
- edev = extcon_get_extcon_dev(name);
- if (!edev)
- return ERR_PTR(-EPROBE_DEFER);
-
- return edev;
- }
-
- /*
- * Try to get an extcon device from the USB PHY controller's "port"
- * node. Check if it has the "port" node first, to avoid printing the
- * error message from underlying code, as it's a valid case: extcon
- * device (and "port" node) may be missing in case of "usb-role-switch"
- * or OTG mode.
- */
- np_phy = of_parse_phandle(dev->of_node, "phys", 0);
- if (of_graph_is_present(np_phy)) {
- struct device_node *np_conn;
-
- np_conn = of_graph_get_remote_node(np_phy, -1, -1);
- if (np_conn)
- edev = extcon_find_edev_by_node(np_conn);
- of_node_put(np_conn);
- }
- of_node_put(np_phy);
-
- return edev;
-}
-
static int dwc3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1848,13 +1802,6 @@ static int dwc3_probe(struct platform_device *pdev)
goto err2;
}

- dwc->edev = dwc3_get_extcon(dwc);
- if (IS_ERR(dwc->edev)) {
- ret = PTR_ERR(dwc->edev);
- dev_err_probe(dwc->dev, ret, "failed to get extcon\n");
- goto err3;
- }
-
ret = dwc3_get_dr_mode(dwc);
if (ret)
goto err3;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 039bf241769a..04a569a3cbab 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -8,6 +8,7 @@
*/

#include <linux/extcon.h>
+#include <linux/of_graph.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/property.h>
@@ -438,6 +439,51 @@ static int dwc3_drd_notifier(struct notifier_block *nb,
return NOTIFY_DONE;
}

+static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
+{
+ struct device *dev = dwc->dev;
+ struct device_node *np_phy;
+ struct extcon_dev *edev = NULL;
+ const char *name;
+
+ if (device_property_read_bool(dev, "extcon"))
+ return extcon_get_edev_by_phandle(dev, 0);
+
+ /*
+ * Device tree platforms should get extcon via phandle.
+ * On ACPI platforms, we get the name from a device property.
+ * This device property is for kernel internal use only and
+ * is expected to be set by the glue code.
+ */
+ if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
+ edev = extcon_get_extcon_dev(name);
+ if (!edev)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ return edev;
+ }
+
+ /*
+ * Try to get an extcon device from the USB PHY controller's "port"
+ * node. Check if it has the "port" node first, to avoid printing the
+ * error message from underlying code, as it's a valid case: extcon
+ * device (and "port" node) may be missing in case of "usb-role-switch"
+ * or OTG mode.
+ */
+ np_phy = of_parse_phandle(dev->of_node, "phys", 0);
+ if (of_graph_is_present(np_phy)) {
+ struct device_node *np_conn;
+
+ np_conn = of_graph_get_remote_node(np_phy, -1, -1);
+ if (np_conn)
+ edev = extcon_find_edev_by_node(np_conn);
+ of_node_put(np_conn);
+ }
+ of_node_put(np_phy);
+
+ return edev;
+}
+
#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
#define ROLE_SWITCH 1
static int dwc3_usb_role_switch_set(struct usb_role_switch *sw,
@@ -538,6 +584,10 @@ int dwc3_drd_init(struct dwc3 *dwc)
{
int ret, irq;

+ dwc->edev = dwc3_get_extcon(dwc);
+ if (IS_ERR(dwc->edev))
+ return PTR_ERR(dwc->edev);
+
if (ROLE_SWITCH &&
device_property_read_bool(dwc->dev, "usb-role-switch"))
return dwc3_setup_role_switch(dwc);
--
2.35.1
\
 
 \ /
  Last update: 2022-09-23 18:32    [W:0.056 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site