lkml.org 
[lkml]   [2022]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] PM: runtime: Return properly from rpm_resume() if dev->power.needs_force_resume flag is set
On Fri, 23 Sept 2022 at 14:47, Liu Ying <victor.liu@nxp.com> wrote:
>
> After a device transitions to sleep state through it's system suspend
> callback pm_runtime_force_suspend(), the device's driver may still try
> to do runtime PM for the device(runtime suspend first and then runtime
> resume) although runtime PM is disabled by that callback. The runtime
> PM operations would not touch the device effectively and the device is
> assumed to be resumed through it's system resume callback
> pm_runtime_force_resume().

This sounds like a fragile use case to me. In principle you want to
allow the device to be runtime resumed/suspended, after the device has
already been put into a low power state through the regular system
suspend callback. Normally it seems better to prevent this from
happening, completely.

That said, in this case, I wonder if a better option would be to point
->suspend_late() to pm_runtime_force_suspend() and ->resume_early() to
pm_runtime_force_resume(), rather than using the regular
->suspend|resume() callbacks. This should avoid the problem, I think,
no?

Note that, the PM core also disables runtime PM for the device in
__device_suspend_late(). For good reasons.

[...]

Kind regards
Uffe

\
 
 \ /
  Last update: 2022-09-23 15:50    [W:0.138 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site