lkml.org 
[lkml]   [2022]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [net-next PATCH] dt-bindings: net: marvell,pp2: convert to json-schema
From
On 22/09/2022 23:10, Michał Grzelak wrote:
> This converts the marvell,pp2 bindings from text to proper schema.
>
> Move 'marvell,system-controller' and 'dma-coherent' properties from
> port up to the controller node, to match what is actually done in DT.
>
> Signed-off-by: Michał Grzelak <mig@semihalf.com>
> ---
> .../devicetree/bindings/net/marvell,pp2.yaml | 292 ++++++++++++++++++
> .../devicetree/bindings/net/marvell-pp2.txt | 141 ---------
> MAINTAINERS | 2 +-
> 3 files changed, 293 insertions(+), 142 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/marvell,pp2.yaml
> delete mode 100644 Documentation/devicetree/bindings/net/marvell-pp2.txt
>
> diff --git a/Documentation/devicetree/bindings/net/marvell,pp2.yaml b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
> new file mode 100644
> index 000000000000..b4589594a0cc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
> @@ -0,0 +1,292 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/marvell,pp2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell CN913X / Marvell Armada 375, 7K, 8K Ethernet Controller
> +
> +maintainers:
> + - Marcin Wojtas <mw@semihalf.com>
> + - Russell King <linux@armlinux.org>
> +
> +description: |
> + Marvell Armada 375 Ethernet Controller (PPv2.1)
> + Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
> + Marvell CN913X Ethernet Controller (PPv2.3)
> +

properties go first.

> +patternProperties:
> +

no need for blank line.

> + '^interrupt': true

This is not a pattern..

> + '^#.*-cells$': true

??? Nope. Please start from scratch either from recent similar bindings
or from example-schema.

> +
> + '^eth[0-9a-f]*(@.*)?$':
> + type: object
> + properties:
> +
> + interrupts:
> + minItems: 1
> + maxItems: 10
> + description: interrupt(s) for the port
> +
> + interrupt-names:
> + minItems: 1
> + maxItems: 10
> +
> + items:
> + oneOf:
> + - pattern: "^hif[0-8]$"
> + - pattern: "^tx-cpu[0-3]$"
> + deprecated: true
> + - const: link
> + - const: rx-shared
> + deprecated: true

List hast to be specific.

> +
> + description: >
> + if more than a single interrupt for is given, must be the
> + name associated to the interrupts listed. Valid names are:
> + "hifX", with X in [0..8], and "link". The names "tx-cpu0",
> + "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
> + for backward compatibility but shouldn't be used for new
> + additions.
> +
> + port-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: ID of the port from the MAC point of view.
> +
> + phy-mode:
> + $ref: "ethernet-controller.yaml#/properties/phy-mode"
> +
> + marvell,loopback:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: port is loopback mode.
> +
> + phy:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: >
> + a phandle to a phy node defining the PHY address
> + (as the reg property, a single integer).
> +
> + required:
> + - interrupts
> + - port-id
> + - phy-mode
> +
> +properties:
> +
> + dma-coherent: true
> +
> + compatible:

This goes first.

> + enum:
> + - marvell,armada-375-pp2
> + - marvell,armada-7k-pp2
> +
> + reg:
> + minItems: 3
> + maxItems: 4
> +
> + marvell,system-controller:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description: a phandle to the system controller.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> +
> +allOf:
> +

No need for blank line.

> + - $ref: ethernet-controller.yaml#
> +
> + - if:
> + not:
> + patternProperties:
> + '^eth[0-9a-f]*(@.*)?$':
> + properties:
> + interrupts:
> + maxItems: 1
> +
> + then:
> + patternProperties:
> + '^eth[0-9a-f]*(@.*)?$':
> + required:
> + - interrupt-names

Skip this.

> +
> + - if:
> + properties:
> + compatible:
> + const: marvell,armada-375-pp2
> +
> + then:
> + properties:
> +

Skip the blank lines after each new block.

> + clocks:
> + items:
> + - description: main controller clock
> + - description: GOP clock
> +
> + clock-names:
> + minItems: 2
> + maxItems: 2
> + items:
> + enum:
> + - pp_clk
> + - gop_clk
> +
> + reg:
> + description: |
> + For "marvell,armada-375-pp2", must contain the following register sets:
> + - common controller registers
> + - LMS registers
> + - one register area per Ethernet port
> +
> + else:
> +
> + patternProperties:
> + '^eth[0-9a-f]*(@.*)?$':
> + properties:
> + gop-port-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: >
> + only for marvell,armada-7k-pp2, ID of the port from the
> + GOP (Group Of Ports) point of view. This ID is used to index the
> + per-port registers in the second register area.
> +
> + required:
> + - gop-port-id
> +
> + properties:
> +
> + clocks:
> + items:
> + - description: main controller clock
> + - description: GOP clock
> + - description: MG clock
> + - description: MG Core clock
> + - description: AXI clock

Why clocks appear only here? All devices require clocks, so this should
be in top level.

> +
> + clock-names:
> + minItems: 5
> + maxItems: 5
> + items:
> + enum:
> + - gop_clk
> + - pp_clk
> + - mg_clk
> + - mg_core_clk
> + - axi_clk
> +
> + reg:
> + description: |
> + For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register sets:
> + - packet processor registers
> + - networking interfaces registers
> + - CM3 address space used for TX Flow Control

Do not define properties in allOf:if:then, but in top-level place.

Really, start with example-schema. This deviates too much from existing
coding style.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-09-23 13:22    [W:0.042 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site