lkml.org 
[lkml]   [2022]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: (subset) [PATCH 0/4] drm/bridge: lt8912b: Fix corrupt display output due to wrong bridge config
Date
Hi,

On Thu, 22 Sep 2022 14:43:02 +0200, Philippe Schenker wrote:
> From: Philippe Schenker <philippe.schenker@toradex.com>
>
> This patch-set fixes the lt8912b driver that currently does not take
> care whether or not the attached display has postiive or negative syncs
> and or reports on EDID if it needs HDMI mode or DVI.
>
> This series addresses also an issue where the LVDS startup sequence was
> written to the wrong I2C address (the lt8912 has three). This caused
> writing into reserved registers and causing an unstable HDMI picture
> that manifests itself only sometimes and depending on the monitor with a
> flickering and a repeating of going black and coming up again. While at
> it move also some sensible comments to the sequence.
>
> [...]

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-fixes)

[1/4] drm/bridge: lt8912b: add vsync hsync
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=da73a94fa282f78d485bd0aab36c8ac15b6f792c
[2/4] drm/bridge: lt8912b: set hdmi or dvi mode
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=6dd1de12e1243f2013e4fabf31e99e63b1a860d0
[3/4] drm/bridge: lt8912b: fix corrupted image output
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=051ad2788d35ca07aec8402542e5d38429f2426a

--
Neil

\
 
 \ /
  Last update: 2022-09-23 11:24    [W:0.101 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site