lkml.org 
[lkml]   [2022]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/4] phy: dphy: add support to calculate the timing based on hs_clk_rate
Date
For MIPI-CSI sender use-case it is common to specify the allowed
link-frequencies which should be used for the MIPI link and is
half the hs-clock rate.

This commit adds a helper to calculate the D-PHY timing based on the
hs-clock rate so we don't need to calculate the timings within the
driver.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
Changelog:

v2:
- added Vinod Koul a-b
---
drivers/phy/phy-core-mipi-dphy.c | 22 ++++++++++++++++++----
include/linux/phy/phy-mipi-dphy.h | 3 +++
2 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c
index ba365bc77407..f4956a417a47 100644
--- a/drivers/phy/phy-core-mipi-dphy.c
+++ b/drivers/phy/phy-core-mipi-dphy.c
@@ -20,16 +20,18 @@
static int phy_mipi_dphy_calc_config(unsigned long pixel_clock,
unsigned int bpp,
unsigned int lanes,
+ unsigned long long hs_clk_rate,
struct phy_configure_opts_mipi_dphy *cfg)
{
- unsigned long long hs_clk_rate;
unsigned long long ui;

if (!cfg)
return -EINVAL;

- hs_clk_rate = pixel_clock * bpp;
- do_div(hs_clk_rate, lanes);
+ if (!hs_clk_rate) {
+ hs_clk_rate = pixel_clock * bpp;
+ do_div(hs_clk_rate, lanes);
+ }

ui = ALIGN(PSEC_PER_SEC, hs_clk_rate);
do_div(ui, hs_clk_rate);
@@ -81,11 +83,23 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
unsigned int lanes,
struct phy_configure_opts_mipi_dphy *cfg)
{
- return phy_mipi_dphy_calc_config(pixel_clock, bpp, lanes, cfg);
+ return phy_mipi_dphy_calc_config(pixel_clock, bpp, lanes, 0, cfg);

}
EXPORT_SYMBOL(phy_mipi_dphy_get_default_config);

+int phy_mipi_dphy_get_default_config_for_hsclk(unsigned long long hs_clk_rate,
+ unsigned int lanes,
+ struct phy_configure_opts_mipi_dphy *cfg)
+{
+ if (!hs_clk_rate)
+ return -EINVAL;
+
+ return phy_mipi_dphy_calc_config(0, 0, lanes, hs_clk_rate, cfg);
+
+}
+EXPORT_SYMBOL(phy_mipi_dphy_get_default_config_for_hsclk);
+
/*
* Validate D-PHY configuration according to MIPI D-PHY specification
* (v1.2, Section Section 6.9 "Global Operation Timing Parameters").
diff --git a/include/linux/phy/phy-mipi-dphy.h b/include/linux/phy/phy-mipi-dphy.h
index a877ffee845d..1ac128d78dfe 100644
--- a/include/linux/phy/phy-mipi-dphy.h
+++ b/include/linux/phy/phy-mipi-dphy.h
@@ -279,6 +279,9 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
unsigned int bpp,
unsigned int lanes,
struct phy_configure_opts_mipi_dphy *cfg);
+int phy_mipi_dphy_get_default_config_for_hsclk(unsigned long long hs_clk_rate,
+ unsigned int lanes,
+ struct phy_configure_opts_mipi_dphy *cfg);
int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg);

#endif /* __PHY_MIPI_DPHY_H_ */
--
2.30.2
\
 
 \ /
  Last update: 2022-09-22 15:50    [W:0.075 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site