lkml.org 
[lkml]   [2022]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 4/4] mmc: sdhci-tegra: Use actual clock rate for SW tuning correction
From
On 20/09/22 15:37, Prathamesh Shete wrote:
> Ensure tegra_host member "curr_clk_rate" holds the actual clock rate
> instead of requested clock rate for proper use during tuning correction
> algorithm. Actual clk rate may not be the same as the requested clk
> frequency depending on the parent clock source set. Tuning correction
> algorithm depends on certain parameters which are sensitive to current
> clk rate. If the host clk is selected instead of the actual clock rate,
> tuning correction algorithm may end up applying invalid correction,
> which could result in errors
>
> Fixes: ea8fc5953e8b ("mmc: tegra: update hw tuning process")
>
> Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
> Signed-off-by: Prathamesh Shete <pshete@nvidia.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
> drivers/mmc/host/sdhci-tegra.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
> index 58449e010a9b..10f6df070456 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -780,7 +780,7 @@ static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
> dev_err(dev, "failed to set clk rate to %luHz: %d\n",
> host_clk, err);
>
> - tegra_host->curr_clk_rate = host_clk;
> + tegra_host->curr_clk_rate = clk_get_rate(pltfm_host->clk);
> if (tegra_host->ddr_signaling)
> host->max_clk = host_clk;
> else

\
 
 \ /
  Last update: 2022-09-22 13:34    [W:0.093 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site