lkml.org 
[lkml]   [2022]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] dt-bindings: regulator: Add bindings for Unisoc's SC2730 regulator
On Thu, 22 Sep 2022, Chunyan Zhang wrote:

> Hi Mark,
>
> Sorry for the late response.
> [1] is the v1 on which we had some discussion. I hope that can help
> recall the issue below.
>
> On Fri, 12 Nov 2021 at 21:46, Mark Brown <broonie@kernel.org> wrote:
> >
> > On Fri, Oct 08, 2021 at 11:19:53AM +0800, Chunyan Zhang wrote:
> >
> > > +properties:
> > > + compatible:
> > > + const: sprd,sc2730-regulator
> >
> > I still don't understand why this MFD subfunction for a specific device
> > is a separate binding with a separate compatible string, the issues I
> > mentioned previously with this just encoding current Linux internals
> > into the DT rather than describing the device still apply.
>
> I understand your point. But like I described previously [1], if we
> still use the current solution (i.e. use devm_of_platform_populate()
> to register MFD subdevices), a compatible string is required. I'm open
> to switching to other solutions, do you have some suggestions?

Many IPs encompassing multiple functions are described that way in
DT. I don't have the details for *this* device to hand, so my
comments here aren't specific to this use-case, but describing each
function individually does describe the H/W accurately, which is all
DT calls for.

Can you imagine describing an SoC, which can be considered as a huge
MFD, with only a single node?

Does the regulator functionality have it's own bank of registers?

--
DEPRECATED: Please use lee@kernel.org

\
 
 \ /
  Last update: 2022-09-22 12:19    [W:0.054 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site