lkml.org 
[lkml]   [2022]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH net-next 0/2] net: phy: mxl-gpy: Add mode for 2 leds
Date
Hi,

> GPY211 phy default to using all four led pins.
> Hardwares using only two leds where led0 is used as the high
> network speed led and led1 the low network speed led will not
> get the correct behaviour since 1Gbit and 2.5Gbit will not be
> represented at all in the existing leds.

I might be wrong, but PHY LED bindings should be integrated with/using
the LED subsystem. Although I didn't see any development regarding this
for a long time.

That being said, it seems you are adding a new (DT) property which
just matches your particular hardware design, no?

-michael

\
 
 \ /
  Last update: 2022-09-22 10:06    [W:0.061 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site