lkml.org 
[lkml]   [2022]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.15 08/45] pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH
Date
From: João H. Spies <jhlspies@gmail.com>

[ Upstream commit b871656aa4f54e04207f62bdd0d7572be1d86b36 ]

Switching between falling/rising edges for IRQ_TYPE_EDGE_BOTH on pins that
require debounce can cause the device to lose events due to a desync
between pin state and irq type.

This problem is resolved by switching between IRQ_TYPE_LEVEL_LOW and
IRQ_TYPE_LEVEL_HIGH instead.

Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: João H. Spies <jhlspies@gmail.com>
Link: https://lore.kernel.org/r/20220808025121.110223-1-jhlspies@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpio-rockchip.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c
index 22b8f0aa80f1..f31b0947eaaa 100644
--- a/drivers/gpio/gpio-rockchip.c
+++ b/drivers/gpio/gpio-rockchip.c
@@ -418,11 +418,11 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
goto out;
} else {
bank->toggle_edge_mode |= mask;
- level |= mask;
+ level &= ~mask;

/*
* Determine gpio state. If 1 next interrupt should be
- * falling otherwise rising.
+ * low otherwise high.
*/
data = readl(bank->reg_base + bank->gpio_regs->ext_port);
if (data & mask)
--
2.35.1


\
 
 \ /
  Last update: 2022-09-21 17:55    [W:0.192 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site