lkml.org 
[lkml]   [2022]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v10 20/39] KVM: nVMX: hyper-v: Enable L2 TLB flush
Date
Enable L2 TLB flush feature on nVMX when:
- Enlightened VMCS is in use.
- The feature flag is enabled in eVMCS.
- The feature flag is enabled in partition assist page.

Perform synthetic vmexit to L1 after processing TLB flush call upon
request (HV_VMX_SYNTHETIC_EXIT_REASON_TRAP_AFTER_FLUSH).

Note: nested_evmcs_l2_tlb_flush_enabled() uses cached VP assist page copy
which gets updated from nested_vmx_handle_enlightened_vmptrld(). This is
also guaranteed to happen post migration with eVMCS backed L2 running.

Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
arch/x86/kvm/vmx/evmcs.c | 17 +++++++++++++++++
arch/x86/kvm/vmx/evmcs.h | 10 ++++++++++
arch/x86/kvm/vmx/nested.c | 22 ++++++++++++++++++++++
3 files changed, 49 insertions(+)

diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c
index 635a0c81ff1d..f7fedc3ed247 100644
--- a/arch/x86/kvm/vmx/evmcs.c
+++ b/arch/x86/kvm/vmx/evmcs.c
@@ -6,6 +6,7 @@
#include "../hyperv.h"
#include "../cpuid.h"
#include "evmcs.h"
+#include "nested.h"
#include "vmcs.h"
#include "vmx.h"
#include "trace.h"
@@ -501,6 +502,22 @@ int nested_enable_evmcs(struct kvm_vcpu *vcpu,
return 0;
}

+bool nested_evmcs_l2_tlb_flush_enabled(struct kvm_vcpu *vcpu)
+{
+ struct kvm_vcpu_hv *hv_vcpu = to_hv_vcpu(vcpu);
+ struct vcpu_vmx *vmx = to_vmx(vcpu);
+ struct hv_enlightened_vmcs *evmcs = vmx->nested.hv_evmcs;
+
+ if (!hv_vcpu || !evmcs)
+ return false;
+
+ if (!evmcs->hv_enlightenments_control.nested_flush_hypercall)
+ return false;
+
+ return hv_vcpu->vp_assist_page.nested_control.features.directhypercall;
+}
+
void vmx_hv_inject_synthetic_vmexit_post_tlb_flush(struct kvm_vcpu *vcpu)
{
+ nested_vmx_vmexit(vcpu, HV_VMX_SYNTHETIC_EXIT_REASON_TRAP_AFTER_FLUSH, 0, 0);
}
diff --git a/arch/x86/kvm/vmx/evmcs.h b/arch/x86/kvm/vmx/evmcs.h
index 7ad56fbc4b4d..dd1589336e79 100644
--- a/arch/x86/kvm/vmx/evmcs.h
+++ b/arch/x86/kvm/vmx/evmcs.h
@@ -63,6 +63,15 @@ DECLARE_STATIC_KEY_FALSE(enable_evmcs);
#define EVMCS1_UNSUPPORTED_VMENTRY_CTRL (0)
#define EVMCS1_UNSUPPORTED_VMFUNC (VMX_VMFUNC_EPTP_SWITCHING)

+/*
+ * Note, Hyper-V isn't actually stealing bit 28 from Intel, just abusing it by
+ * pairing it with architecturally impossible exit reasons. Bit 28 is set only
+ * on SMI exits to a SMI transfer monitor (STM) and if and only if a MTF VM-Exit
+ * is pending. I.e. it will never be set by hardware for non-SMI exits (there
+ * are only three), nor will it ever be set unless the VMM is an STM.
+ */
+#define HV_VMX_SYNTHETIC_EXIT_REASON_TRAP_AFTER_FLUSH 0x10000031
+
struct evmcs_field {
u16 offset;
u16 clean_field;
@@ -241,6 +250,7 @@ int nested_enable_evmcs(struct kvm_vcpu *vcpu,
uint16_t *vmcs_version);
void nested_evmcs_filter_control_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
int nested_evmcs_check_controls(struct vmcs12 *vmcs12);
+bool nested_evmcs_l2_tlb_flush_enabled(struct kvm_vcpu *vcpu);
void vmx_hv_inject_synthetic_vmexit_post_tlb_flush(struct kvm_vcpu *vcpu);

#endif /* __KVM_X86_VMX_EVMCS_H */
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index 0634518a6719..1451a7a2c488 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -1132,6 +1132,17 @@ static void nested_vmx_transition_tlb_flush(struct kvm_vcpu *vcpu,
{
struct vcpu_vmx *vmx = to_vmx(vcpu);

+ /*
+ * KVM_REQ_HV_TLB_FLUSH flushes entries from either L1's VP_ID or
+ * L2's VP_ID upon request from the guest. Make sure we check for
+ * pending entries for the case when the request got misplaced (e.g.
+ * a transition from L2->L1 happened while processing L2 TLB flush
+ * request or vice versa). kvm_hv_vcpu_flush_tlb() will not flush
+ * anything if there are no requests in the corresponding buffer.
+ */
+ if (to_hv_vcpu(vcpu))
+ kvm_make_request(KVM_REQ_HV_TLB_FLUSH, vcpu);
+
/*
* If vmcs12 doesn't use VPID, L1 expects linear and combined mappings
* for *all* contexts to be flushed on VM-Enter/VM-Exit, i.e. it's a
@@ -3267,6 +3278,12 @@ static bool nested_get_vmcs12_pages(struct kvm_vcpu *vcpu)

static bool vmx_get_nested_state_pages(struct kvm_vcpu *vcpu)
{
+ /*
+ * Note: nested_get_evmcs_page() also updates 'vp_assist_page' copy
+ * in 'struct kvm_vcpu_hv' in case eVMCS is in use, this is mandatory
+ * to make nested_evmcs_l2_tlb_flush_enabled() work correctly post
+ * migration.
+ */
if (!nested_get_evmcs_page(vcpu)) {
pr_debug_ratelimited("%s: enlightened vmptrld failed\n",
__func__);
@@ -6143,6 +6160,11 @@ static bool nested_vmx_l0_wants_exit(struct kvm_vcpu *vcpu,
* Handle L2's bus locks in L0 directly.
*/
return true;
+ case EXIT_REASON_VMCALL:
+ /* Hyper-V L2 TLB flush hypercall is handled by L0 */
+ return guest_hv_cpuid_has_l2_tlb_flush(vcpu) &&
+ nested_evmcs_l2_tlb_flush_enabled(vcpu) &&
+ kvm_hv_is_tlb_flush_hcall(vcpu);
default:
break;
}
--
2.37.3
\
 
 \ /
  Last update: 2022-09-21 17:30    [W:0.966 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site