lkml.org 
[lkml]   [2022]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/3] arm64: dts: mediatek: asurada: Add display regulators
Hi,

On Fri, Sep 9, 2022 at 1:12 AM Nícolas F. R. A. Prado
<nfraprado@collabora.com> wrote:
>
> Add the regulators present on the Asurada platform that are used to
> power the internal and external displays.
>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
>
> ---
>
> .../boot/dts/mediatek/mt8192-asurada.dtsi | 114 ++++++++++++++++++
> 1 file changed, 114 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
> index 4b314435f8fd..1d99e470ea1a 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
> @@ -23,6 +23,42 @@ memory@40000000 {
> reg = <0 0x40000000 0 0x80000000>;
> };
>
> + pp1000_dpbrdg: regulator-1v0-dpbrdg {
> + compatible = "regulator-fixed";
> + regulator-name = "pp1000_dpbrdg";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pp1000_dpbrdg_en_pins>;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;

This is fed by a rail called PP1350_VS2, which is from the MT6359 PMIC.
And this regulator is a proper LDO.

> + enable-active-high;
> + regulator-boot-on;
> + gpio = <&pio 19 GPIO_ACTIVE_HIGH>;
> + };
> +
> + pp1000_mipibrdg: regulator-1v0-mipibrdg {
> + compatible = "regulator-fixed";
> + regulator-name = "pp1000_mipibrdg";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pp1000_mipibrdg_en_pins>;
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;

This is fed by a rail called PP1350_VS2, which is from the MT6359 PMIC.
And this regulator is a proper LDO.

> + enable-active-high;
> + regulator-boot-on;
> + gpio = <&pio 129 GPIO_ACTIVE_HIGH>;
> + };
> +
> + pp1800_dpbrdg: regulator-1v8-dpbrdg {
> + compatible = "regulator-fixed";
> + regulator-name = "pp1800_dpbrdg";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pp1800_dpbrdg_en_pins>;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;

This regulator is only a power switch. Please drop the min/max properties.
This is fed by a rail called PP1800_VIO18_U, which is from an LDO on the
MT6359 PMIC.

> + enable-active-high;
> + regulator-boot-on;
> + gpio = <&pio 126 GPIO_ACTIVE_HIGH>;
> + };
> +
> /* system wide LDO 1.8V power rail */
> pp1800_ldo_g: regulator-1v8-g {
> compatible = "regulator-fixed";
> @@ -34,6 +70,30 @@ pp1800_ldo_g: regulator-1v8-g {
> vin-supply = <&pp3300_g>;
> };
>
> + pp1800_mipibrdg: regulator-1v8-mipibrdg {
> + compatible = "regulator-fixed";
> + regulator-name = "pp1800_mipibrdg";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pp1800_mipibrdg_en_pins>;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;

This regulator is only a power switch. Please drop the min/max properties.
This is fed by a rail called PP1800_VIO18_U, which is from an LDO on the
MT6359 PMIC.

> + enable-active-high;
> + regulator-boot-on;
> + gpio = <&pio 128 GPIO_ACTIVE_HIGH>;
> + };
> +
> + pp3300_dpbrdg: regulator-3v3-dpbrdg {
> + compatible = "regulator-fixed";
> + regulator-name = "pp3300_dpbrdg";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pp3300_dpbrdg_en_pins>;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;

This regulator is only a power switch. Please drop the min/max properties.
This is fed by a rail called PP3300_G, which is already described below.

> + enable-active-high;
> + regulator-boot-on;
> + gpio = <&pio 26 GPIO_ACTIVE_HIGH>;
> + };
> +
> /* system wide switching 3.3V power rail */
> pp3300_g: regulator-3v3-g {
> compatible = "regulator-fixed";
> @@ -56,6 +116,18 @@ pp3300_ldo_z: regulator-3v3-z {
> vin-supply = <&ppvar_sys>;
> };
>
> + pp3300_mipibrdg: regulator-3v3-mipibrdg {
> + compatible = "regulator-fixed";
> + regulator-name = "pp3300_mipibrdg";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pp3300_mipibrdg_en_pins>;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;

This regulator is only a power switch. Please drop the min/max properties.
This is fed by a rail called PP3300_G, which is already described above.

ChenYu

> + enable-active-high;
> + regulator-boot-on;
> + gpio = <&pio 127 GPIO_ACTIVE_HIGH>;
> + };
> +
> /* separately switched 3.3V power rail */
> pp3300_u: regulator-3v3-u {
> compatible = "regulator-fixed";
> @@ -719,6 +791,48 @@ pins-wifi-kill {
> };
> };
>
> + pp1000_dpbrdg_en_pins: pp1000-dpbrdg-en-pins {
> + pins-en {
> + pinmux = <PINMUX_GPIO19__FUNC_GPIO19>;
> + output-low;
> + };
> + };
> +
> + pp1000_mipibrdg_en_pins: pp1000-mipibrdg-en-pins {
> + pins-en {
> + pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
> + output-low;
> + };
> + };
> +
> + pp1800_dpbrdg_en_pins: pp1800-dpbrdg-en-pins {
> + pins-en {
> + pinmux = <PINMUX_GPIO126__FUNC_GPIO126>;
> + output-low;
> + };
> + };
> +
> + pp1800_mipibrdg_en_pins: pp1800-mipibrd-en-pins {
> + pins-en {
> + pinmux = <PINMUX_GPIO128__FUNC_GPIO128>;
> + output-low;
> + };
> + };
> +
> + pp3300_dpbrdg_en_pins: pp3300-dpbrdg-en-pins {
> + pins-en {
> + pinmux = <PINMUX_GPIO26__FUNC_GPIO26>;
> + output-low;
> + };
> + };
> +
> + pp3300_mipibrdg_en_pins: pp3300-mipibrdg-en-pins {
> + pins-en {
> + pinmux = <PINMUX_GPIO127__FUNC_GPIO127>;
> + output-low;
> + };
> + };
> +
> pp3300_wlan_pins: pp3300-wlan-pins {
> pins-pcie-en-pp3300-wlan {
> pinmux = <PINMUX_GPIO143__FUNC_GPIO143>;
> --
> 2.37.3
>

\
 
 \ /
  Last update: 2022-09-21 16:21    [W:0.088 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site