lkml.org 
[lkml]   [2022]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH net-next 08/13] net: dsa: hellcreek: deny tc-taprio changes to per-tc max SDU
Date
On Wed, Sep 21, 2022 at 01:46:22PM +0200, Kurt Kanzenbach wrote:
> >> So, configured to 128 and 132 bytes (including VLAN Ethernet header) is
> >> the maximum frame size which passes through.
> >
> > Frame size means MAC DA + MAC SA + VLAN header + Ethertype + L2 payload,
> > and without FCS, right?
>
> Yes.
>
> >
> > Because max_sdu 128 only counts the L2 payload, so the maximum frame
> > size that passes should be 142 octets, or 146 octets with VLAN.
>
> Ok, i see. So, for 128 max-sdu we should end up with something like this
> in the prio config register:
>
> schedule->max_sdu[tc] + VLAN_ETH_HLEN - 4

What does 4 represent? ETH_FCS_LEN?

So when schedule->max_sdu[tc] is 128, you write to HR_PTPRTCCFG_MAXSDU
the value of 128 + 18 - 4 = 142, and this will pass packets (VLAN-tagged
or not) with an skb->len (on xmit) <= 142, right?
\
 
 \ /
  Last update: 2022-09-21 16:12    [W:0.063 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site