lkml.org 
[lkml]   [2022]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] powerpc: Save AMR/IAMR when switching tasks
Date


Le 21/09/2022 à 05:33, Samuel Holland a écrit :
> On 9/19/22 07:37, Michael Ellerman wrote:
>> Christophe Leroy <christophe.leroy@csgroup.eu> writes:
>>> Le 16/09/2022 à 07:05, Samuel Holland a écrit :
>>>> With CONFIG_PREEMPT=y (involuntary preemption enabled), it is possible
>>>> to switch away from a task inside copy_{from,to}_user. This left the CPU
>>>> with userspace access enabled until after the next IRQ or privilege
>>>> level switch, when AMR/IAMR got reset to AMR_KU[AE]P_BLOCKED. Then, when
>>>> switching back to the original task, the userspace access would fault:
>>>
>>> This is not supposed to happen. You never switch away from a task
>>> magically. Task switch will always happen in an interrupt, that means
>>> copy_{from,to}_user() get interrupted.
>>
>> Unfortunately this isn't true when CONFIG_PREEMPT=y.
>>
>> We can switch away without an interrupt via:
>> __copy_tofrom_user()
>> -> __copy_tofrom_user_power7()
>> -> exit_vmx_usercopy()
>> -> preempt_enable()
>> -> __preempt_schedule()
>> -> preempt_schedule()
>> -> preempt_schedule_common()
>> -> __schedule()
>>
>> I do some boot tests with CONFIG_PREEMPT=y, but I realise now those are
>> all on Power8, which is a bit of an oversight on my part.
>>
>> And clearly no one else tests it, until now :)
>>
>> I think the root of our problem is that our KUAP lock/unlock is at too
>> high a level, ie. we do it in C around the low-level copy to/from.
>>
>> eg:
>>
>> static inline unsigned long
>> raw_copy_to_user(void __user *to, const void *from, unsigned long n)
>> {
>> unsigned long ret;
>>
>> allow_write_to_user(to, n);
>> ret = __copy_tofrom_user(to, (__force const void __user *)from, n);
>> prevent_write_to_user(to, n);
>> return ret;
>> }
>>
>> There's a reason we did that, which is that we have various different
>> KUAP methods on different platforms, not a simple instruction like other
>> arches.
>>
>> But that means we have that exit_vmx_usercopy() being called deep in the
>> guts of __copy_tofrom_user(), with KUAP disabled, and then we call into
>> the preempt machinery and eventually schedule.
>>
>> I don't see an easy way to fix that "properly", it would be a big change
>> to all platforms to push the KUAP save/restore down into the low level
>> asm code.
>>
>> But I think the patch below does fix it, although it abuses things a
>> little. Namely it only works because the 64s KUAP code can handle a
>> double call to prevent, and doesn't need the addresses or size for the
>> allow.
>>
>> Still I think it might be our best option for an easy fix.
>>
>> Samuel, can you try this on your system and check it works for you?
>
> It looks like your patch works. Thanks for the correct fix!

Instead of the patch from Michael, could you try by replacing
preempt_enable() by preempt_enable_no_resched() in exit_vmx_usercopy() ?

>
> I replaced my patch with the one below, and enabled
> CONFIG_PPC_KUAP_DEBUG=y, and I was able to do several kernel builds
> without any crashes or splats in dmesg.

Did you try CONFIG_PPC_KUAP_DEBUG without the patch ? Did it detect any
problem ?

Thanks
Christophe

>
> I suppose the other calls to exit_vmx_usercopy() in copyuser_power7.S
> would not cause a crash, because there is no userspace memory access
> afterward, but couldn't they still leave KUAP erroneously unlocked?
>
> Regards,
> Samuel
>
>> diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
>> index 97a77b37daa3..c50080c6a136 100644
>> --- a/arch/powerpc/include/asm/processor.h
>> +++ b/arch/powerpc/include/asm/processor.h
>> @@ -432,6 +432,7 @@ int speround_handler(struct pt_regs *regs);
>> /* VMX copying */
>> int enter_vmx_usercopy(void);
>> int exit_vmx_usercopy(void);
>> +void exit_vmx_usercopy_continue(void);
>> int enter_vmx_ops(void);
>> void *exit_vmx_ops(void *dest);
>>
>> diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S
>> index 28f0be523c06..77804860383c 100644
>> --- a/arch/powerpc/lib/copyuser_power7.S
>> +++ b/arch/powerpc/lib/copyuser_power7.S
>> @@ -47,7 +47,7 @@
>> ld r15,STK_REG(R15)(r1)
>> ld r14,STK_REG(R14)(r1)
>> .Ldo_err3:
>> - bl exit_vmx_usercopy
>> + bl exit_vmx_usercopy_continue
>> ld r0,STACKFRAMESIZE+16(r1)
>> mtlr r0
>> b .Lexit
>> diff --git a/arch/powerpc/lib/vmx-helper.c b/arch/powerpc/lib/vmx-helper.c
>> index f76a50291fd7..78a18b8384ff 100644
>> --- a/arch/powerpc/lib/vmx-helper.c
>> +++ b/arch/powerpc/lib/vmx-helper.c
>> @@ -8,6 +8,7 @@
>> */
>> #include <linux/uaccess.h>
>> #include <linux/hardirq.h>
>> +#include <asm/kup.h>
>> #include <asm/switch_to.h>
>>
>> int enter_vmx_usercopy(void)
>> @@ -34,12 +35,19 @@ int enter_vmx_usercopy(void)
>> */
>> int exit_vmx_usercopy(void)
>> {
>> + prevent_user_access(KUAP_READ_WRITE);
>> disable_kernel_altivec();
>> pagefault_enable();
>> preempt_enable();
>> return 0;
>> }
>>
>> +void exit_vmx_usercopy_continue(void)
>> +{
>> + exit_vmx_usercopy();
>> + allow_read_write_user(NULL, NULL, 0);
>> +}
>> +
>> int enter_vmx_ops(void)
>> {
>> if (in_interrupt())
>>
>
\
 
 \ /
  Last update: 2022-09-21 07:18    [W:0.314 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site