lkml.org 
[lkml]   [2022]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 1/2] net/smc: Introduce a specific sysctl for TEST_LINK time
On Tue, Sep 20, 2022 at 02:23:09PM +0800, Wen Gu wrote:
>
>
>On 2022/9/20 12:55, dust.li wrote:
>
>> On Tue, Sep 20, 2022 at 10:53:54AM +0800, Wen Gu wrote:
>> > SMC-R tests the viability of link by sending out TEST_LINK LLC
>> > messages over RoCE fabric when connections on link have been
>> > idle for a time longer than keepalive interval (testlink time).
>> >
>> > But using tcp_keepalive_time as testlink time maybe not quite
>> > suitable because it is default no less than two hours[1], which
>> > is too long for single link to find peer dead. The active host
>> > will still use peer-dead link (QP) sending messages, and can't
>> > find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes
>> > more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally.
>> >
>> > So this patch introduces a independent sysctl for SMC-R to set
>> > link keepalive time, in order to detect link down in time. The
>> > default value is 30 seconds.
>> >
>> > [1] https://www.rfc-editor.org/rfc/rfc1122#page-101
>> >
>> > Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
>> > ---
>
>> > /* called after lgr was removed from lgr_list */
>> > diff --git a/net/smc/smc_llc.h b/net/smc/smc_llc.h
>> > index 4404e52..1de9a29 100644
>> > --- a/net/smc/smc_llc.h
>> > +++ b/net/smc/smc_llc.h
>> > @@ -19,6 +19,7 @@
>> >
>> > #define SMC_LLC_WAIT_FIRST_TIME (5 * HZ)
>> > #define SMC_LLC_WAIT_TIME (2 * HZ)
>> > +#define SMC_LLC_TESTLINK_DEFAULT_TIME 30
>>
>> I'm wondering why we don't follow the upper to macros using (30 * HZ) ?
>>
>Thanks for the reivew.
>
>Because the value of sysctl_smcr_testlink_time is in seconds, and the value
>of llc_testlink_time is jiffies.
>
>I have thought about
>1) using proc_dointvec_jiffies as sysctl's proc_handler just like TCP does.
> But proc_dointvec_jiffies has no minimum limit, value 0 makes no sense for SMC testlink.

Maybe 0 means disable the LLC TEST LINK ?


>2) using proc_dointvec_ms_jiffies_minmax as proc_handler. But millisecond interval
> seems expensive for SMC test link.
>
>So, I choose to use proc_dointvec_minmax, make sysctl_smcr_testlink_time in
>seconds, and convert to jiffies when assigning to llc_testlink_time.

If proc_dointvec_jiffies_minmax is really the problem, maybe you can
write your own proc handler.


Thanks

\
 
 \ /
  Last update: 2022-09-20 10:26    [W:0.064 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site