lkml.org 
[lkml]   [2022]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [RESEND PATCH v6 08/10] dt-bindings: spmi: spmi-pmic-arb: make interrupt properties as optional
    From


    On 2022/9/1 1:36, Stephen Boyd wrote:
    > Quoting Fenglin Wu (2022-06-11 20:24:44)
    >> From: David Collins <collinsd@codeaurora.org>
    >>
    >> Make all interrupt related properties as optional instead of
    >> required. Some boards do not required PMIC IRQ support and it
    >> isn't needed to handle SPMI bus transactions, so specify it as
    >> optional.
    >>
    >> Signed-off-by: David Collins <collinsd@codeaurora.org>
    >> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
    >> Acked-by: Rob Herring <robh@kernel.org>
    >> ---
    >> Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml | 3 ---
    >> 1 file changed, 3 deletions(-)
    >>
    >> diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
    >> index 55d379c..fee4f0e 100644
    >> --- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
    >> +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
    >> @@ -88,9 +88,6 @@ properties:
    >> required:
    >> - compatible
    >> - reg-names
    >> - - interrupts
    >> - - interrupt-names
    >> - - '#interrupt-cells'
    >
    > Let me clarify my comment on the next driver patch here. It looks like
    > we're making the properties optional here so that the driver can choose
    > to create or not create the irqchip based on the presence of the
    > property. Are there PMIC arbiters that don't have irq support? Or is it
    > only that some board designs don't use interrupt support of the PMIC,
    > because all the devices that use interrupts on the PMIC aren't enabled
    > (status = "okay")?
    >
    > We shouldn't get into a situation where we're removing the interrupt
    > properties because we want the driver to skip creating the irqchip. That
    > makes the binding too loose, where we can't validate existing DT files.
    > It also makes it confusing to include the DTS files when the device
    > always supports interrupt capabilities, just we don't want to use it.

    Thanks for reviewing the changes Stephen.

    I discussed with the change author David, he mentioned that these two
    changes were made for supporting trust VM features. In the design, there
    are two SPMI arbiter device instances, one is in non-secure world (with
    Linux Android) and the other is in secure world (with LE), both
    instances use the same SPMI arbiter driver but only the LA system
    handles the interrupt, and the irqchip will not be created for LE system
    to prevent any interrupt being fired and routed to the LA system.

    There are actually two other changes in SPMI driver made for the same
    secure VM feature. The driver exports a new API which would translate
    the SPMI address (SID+PID+OFFSET) into the SoC physical register address
    range that handles the SPMI write to the corresponding SPMI registers,
    and the secure system would do some protection on these registers to
    block any SPMI write from non-secure world when the secure feature is
    enabled.

    There will be 4 changes related in total, I will send them together with
    a new topic next time and you can help to review them after that.
    Thank you!

    \
     
     \ /
      Last update: 2022-09-02 13:44    [W:2.754 / U:0.096 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site