lkml.org 
[lkml]   [2022]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 2/7] arm64: dts: imx8mp: Add iMX8MP PCIe support
From
Date
Am Donnerstag, dem 01.09.2022 um 12:02 +0800 schrieb Richard Zhu:
> Add i.MX8MP PCIe support.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Tested-by: Marek Vasut <marex@denx.de>
> Tested-by: Richard Leitner <richard.leitner@skidata.com>
> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

> ---
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 43 +++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index fe178b7d063c..21a4cc417c81 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -5,6 +5,7 @@
>
> #include <dt-bindings/clock/imx8mp-clock.h>
> #include <dt-bindings/power/imx8mp-power.h>
> +#include <dt-bindings/reset/imx8mp-reset.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -1084,6 +1085,17 @@ media_blk_ctrl: blk-ctrl@32ec0000 {
> #power-domain-cells = <1>;
> };
>
> + pcie_phy: pcie-phy@32f00000 {
> + compatible = "fsl,imx8mp-pcie-phy";
> + reg = <0x32f00000 0x10000>;
> + resets = <&src IMX8MP_RESET_PCIEPHY>,
> + <&src IMX8MP_RESET_PCIEPHY_PERST>;
> + reset-names = "pciephy", "perst";
> + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>;
> + #phy-cells = <0>;
> + status = "disabled";
> + };
> +
> hsio_blk_ctrl: blk-ctrl@32f10000 {
> compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
> reg = <0x32f10000 0x24>;
> @@ -1099,6 +1111,37 @@ hsio_blk_ctrl: blk-ctrl@32f10000 {
> };
> };
>
> + pcie: pcie@33800000 {
> + compatible = "fsl,imx8mp-pcie";
> + reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
> + reg-names = "dbi", "config";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + bus-range = <0x00 0xff>;
> + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
> + <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
> + num-lanes = <1>;
> + num-viewport = <4>;
> + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi";
> + #interrupt-cells = <1>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> + fsl,max-link-speed = <3>;
> + linux,pci-domain = <0>;
> + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
> + resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
> + <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
> + reset-names = "apps", "turnoff";
> + phys = <&pcie_phy>;
> + phy-names = "pcie-phy";
> + status = "disabled";
> + };
> +
> gpu3d: gpu@38000000 {
> compatible = "vivante,gc";
> reg = <0x38000000 0x8000>;


\
 
 \ /
  Last update: 2022-09-02 10:45    [W:0.159 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site