Messages in this thread Patch in this message | | | From | Andy Shevchenko <> | Subject | [PATCH v1 05/17] pinctrl: cy8c95x0: Fix pin control name to enable more than one | Date | Fri, 2 Sep 2022 21:26:38 +0300 |
| |
The Cypress GPIO expander is an I²C discrete component. Hence the platform may contain more than one of a such. Currently this has limitations in the driver due to same name used for all chips of a type. Replace this with device instance specific name.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/pinctrl/pinctrl-cy8c95x0.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c index f016c283af57..a05fbf818bf2 100644 --- a/drivers/pinctrl/pinctrl-cy8c95x0.c +++ b/drivers/pinctrl/pinctrl-cy8c95x0.c @@ -1188,8 +1188,7 @@ static int cy8c95x0_setup_pinctrl(struct cy8c95x0_pinctrl *chip) pd->confops = &cy8c95x0_pinconf_ops; pd->pmxops = &cy8c95x0_pmxops; pd->npins = chip->gpio_chip.ngpio; - pd->name = devm_kasprintf(chip->dev, GFP_KERNEL, "pinctrl-%s", - chip->name); + pd->name = dev_name(chip->dev); pd->pins = cy8c9560_pins; pd->npins = chip->tpin; pd->owner = THIS_MODULE; -- 2.35.1
| |