lkml.org 
[lkml]   [2022]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [Patch v2] usb: core: stop USB enumeration if too many retries
On Fri, Sep 2, 2022 at 10:49 PM Alan Stern <stern@rowland.harvard.edu> wrote:
>
> On Fri, Sep 02, 2022 at 05:15:35PM +0800, Ray Chi wrote:
> > If a broken accessory connected to a USB host, usbcore might
> > keep doing enumeration retries and it will take a long time to
> > cause system unstable.
> >
> > This patch provides a quirk to specific USB ports of the hub to
> > stop USB enumeration if needed.
>
> This seems very awkward. Why not have a quirk that prevents USB
> enumeration completely, instead of after some number of retries? After
> all, if the port is connected to a broken accessory, there's no reason
> to try enumerating it even once.
>
> For that matter, have you tried using the existing "disabled" port
> attribute instead of adding a new quirk? Does it already solve your
> problem?
>

Since we don't know if the connected accessory is normal or broken, doing port
initialization is necessary.

> >
> > Signed-off-by: Ray Chi <raychi@google.com>
> > ---
> > Changes since v1:
> > - remove usb_hub_set_port_power()
> > - add a variable ignore_connect into struct port_dev
> > - modify hub_port_stop_enumerate() and set ignore_connect in
> > this function
> > - avoid calling hub_port_connect_change() in port_event()
> > ---
> > drivers/usb/core/hub.c | 40 ++++++++++++++++++++++++++++++++++++++++
> > drivers/usb/core/hub.h | 2 ++
> > include/linux/usb.h | 3 +++
> > 3 files changed, 45 insertions(+)
> >
> > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> > index 2633acde7ac1..7f34ee8bb81e 100644
> > --- a/drivers/usb/core/hub.c
> > +++ b/drivers/usb/core/hub.c
> > @@ -3081,6 +3081,30 @@ static int hub_port_reset(struct usb_hub *hub, int port1,
> > return status;
> > }
> >
> > +/* Stop enumerate if the port met errors and quirk is set */
> > +static bool hub_port_stop_enumerate(struct usb_hub *hub, int port1, int retries)
> > +{
> > + struct usb_port *port_dev = hub->ports[port1 - 1];
> > +
> > + if (port_dev->quirks & USB_PORT_QUIRK_STOP_ENUM) {
> > + if (port_dev->ignore_connect)
> > + return true;
> > +
> > + if (retries < (PORT_INIT_TRIES - 1) / 2)
> > + return false;
> > +
> > + /*
> > + * Some USB hosts can't take a long time to keep doing enumeration
> > + * retry. After doing half of the retries, we would turn off the port
> > + * power to stop enumeration if the quirk is set.
>
> What made you decide that half of the retries was the right place to
> stop? Why not do all the retries?

Since some normal devices will be timeout in the first attempt, I set
the condition to half
of the retries. All the retries will take 12*timeout seconds. It is
too long so that a watchdog
timeout problem may happen.

>
> > + */
> > + port_dev->ignore_connect = true;
> > + } else
> > + port_dev->ignore_connect = false;
> > +
> > + return port_dev->ignore_connect;
> > +}
>
> If the quirk prevented enumeration completely then this function
> wouldn't be needed.

The enumeration is still needed as above.

>
> > +
> > /* Check if a port is power on */
> > int usb_port_is_power_on(struct usb_hub *hub, unsigned int portstatus)
> > {
> > @@ -4855,6 +4879,11 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
> > buf->bMaxPacketSize0;
> > kfree(buf);
> >
> > + if (r < 0 && (port_dev->quirks & USB_PORT_QUIRK_STOP_ENUM)) {
>
> How come this line tests the quirk but doesn't call
> hub_port_stop_enumerate()?

Since the quirk is used to stop enumeration and reduce the total time.
If the port has the quirk, I think the port doesn't need to do
set_address after the port gets
failures in the new scheme. It will add 2 attempts * timeout (defined
in hc_driver) seconds.

>
> > + retval = r;
> > + goto fail;
> > + }
> > +
> > retval = hub_port_reset(hub, port1, udev, delay, false);
> > if (retval < 0) /* error or disconnect */
> > goto fail;
> > @@ -5387,6 +5416,9 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
> > if ((status == -ENOTCONN) || (status == -ENOTSUPP))
> > break;
> >
> > + if (hub_port_stop_enumerate(hub, port1, i))
> > + break;
> > +
> > /* When halfway through our retry count, power-cycle the port */
> > if (i == (PORT_INIT_TRIES - 1) / 2) {
> > dev_info(&port_dev->dev, "attempt power cycle\n");
> > @@ -5550,6 +5582,9 @@ static void port_event(struct usb_hub *hub, int port1)
> > if (usb_hub_port_status(hub, port1, &portstatus, &portchange) < 0)
> > return;
> >
> > + if (hub_port_stop_enumerate(hub, port1, 0))
> > + return;
>
> This test is in the wrong place. It should go right next to the check
> for pm_runtime_active(&port_dev->dev); even though the port isn't being
> used we still want to turn off the port-change bits in the port status.
>

I will modify it later.

> > +
> > if (portchange & USB_PORT_STAT_C_CONNECTION) {
> > usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
> > connect_change = 1;
> > @@ -5934,6 +5969,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
> > ret = hub_port_init(parent_hub, udev, port1, i);
> > if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
> > break;
> > +
> > + if (hub_port_stop_enumerate(parent_hub, port1, i))
> > + goto stop_enumerate;
>
> Also this -- the purpose is to avoid calling hub_port_init() for ports
> with the quirk, so this test belongs before the call to hub_port_init(),
> not after.

Since hub_port_init() is needed to know if the connected accessory is
normal or not,
I put the hub_port_stop_enumerate() after hub_port_init().

>
> > }
> > mutex_unlock(hcd->address0_mutex);
> >
> > @@ -6022,6 +6060,8 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
> > udev->bos = bos;
> > return 0;
> >
> > +stop_enumerate:
> > + mutex_unlock(hcd->address0_mutex);
> > re_enumerate:
> > usb_release_bos_descriptor(udev);
> > udev->bos = bos;
> > diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
> > index b2925856b4cb..f0aa718f4c7f 100644
> > --- a/drivers/usb/core/hub.h
> > +++ b/drivers/usb/core/hub.h
> > @@ -90,6 +90,7 @@ struct usb_hub {
> > * @is_superspeed cache super-speed status
> > * @usb3_lpm_u1_permit: whether USB3 U1 LPM is permitted.
> > * @usb3_lpm_u2_permit: whether USB3 U2 LPM is permitted.
> > + * @ignore_connect: ignore the connection or not
> > */
> > struct usb_port {
> > struct usb_device *child;
> > @@ -103,6 +104,7 @@ struct usb_port {
> > u32 over_current_count;
> > u8 portnum;
> > u32 quirks;
> > + bool ignore_connect;
>
> This should be a bitfield like the following entries. It's okay to make
> it a bool rather than unsigned int. But you may find that you don't
> need this field at all.
>
> > unsigned int is_superspeed:1;
> > unsigned int usb3_lpm_u1_permit:1;
> > unsigned int usb3_lpm_u2_permit:1;
> > diff --git a/include/linux/usb.h b/include/linux/usb.h
> > index f7a9914fc97f..fc0fef58c706 100644
> > --- a/include/linux/usb.h
> > +++ b/include/linux/usb.h
> > @@ -490,6 +490,9 @@ enum usb_port_connect_type {
> > /* Decrease TRSTRCY to 10ms during device enumeration. */
> > #define USB_PORT_QUIRK_FAST_ENUM BIT(1)
> >
> > +/* Stop the enumeration for the given port if there are too many failures*/
> > +#define USB_PORT_QUIRK_STOP_ENUM BIT(2)
>
> When you define a new port quirk, you have to document it in the
> /sys/bus/usb/devices/.../<hub_interface>/port<X>/quirks section of
> Documentation/ABI/testing/sysfs-bus-usb.
>

I will document it later.

> Alan Stern
>
> > +
> > /*
> > * USB 2.0 Link Power Management (LPM) parameters.
> > */
> > --
> > 2.37.2.789.g6183377224-goog
> >

Thanks,
Ray

\
 
 \ /
  Last update: 2022-09-02 18:15    [W:0.207 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site