lkml.org 
[lkml]   [2022]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH net-next 11/13] sunhme: Combine continued messages
Date
Am Montag, 19. September 2022, 01:26:24 CEST schrieb Sean Anderson:
> This driver seems to have been written under the assumption that messages
> can be continued arbitrarily. I'm not when this changed (if ever), but such
> ad-hoc continuations are liable to be rudely interrupted. Convert all such
> instances to single prints. This loses a bit of timing information (such as
> when a line was constructed piecemeal as the function executed), but it's
> easy to add a few prints if necessary. This also adds newlines to the ends
> of any prints without them.

I have a similar patch around, but yours catches more places.

> diff --git a/drivers/net/ethernet/sun/sunhme.c
> b/drivers/net/ethernet/sun/sunhme.c index 98c38e213bab..9965c9c872a6 100644
> --- a/drivers/net/ethernet/sun/sunhme.c
> +++ b/drivers/net/ethernet/sun/sunhme.c
> @@ -330,7 +331,6 @@ static int happy_meal_bb_read(struct happy_meal *hp,
> int retval = 0;
> int i;
>
> - ASD("happy_meal_bb_read: reg=%d ", reg);
>
> /* Enable the MIF BitBang outputs. */
> hme_write32(hp, tregs + TCVR_BBOENAB, 1);

You can remove one of the empty lines here.

> @@ -1196,15 +1182,15 @@ static void happy_meal_init_rings(struct happy_meal
> *hp) struct hmeal_init_block *hb = hp->happy_block;
> int i;
>
> - HMD("happy_meal_init_rings: counters to zero, ");
> + HMD("counters to zero\n");
> hp->rx_new = hp->rx_old = hp->tx_new = hp->tx_old = 0;
>
> /* Free any skippy bufs left around in the rings. */
> - HMD("clean, ");
> + HMD("clean\n");

I don't think this one is actually needed, there isn't much than can happen in
between these 2 prints.

> @@ -1282,17 +1268,11 @@ happy_meal_begin_auto_negotiation(struct happy_meal
> *hp, * XXX so I completely skip checking for it in the BMSR for now. */
>
> -#ifdef AUTO_SWITCH_DEBUG
> - ASD("%s: Advertising [ ");
> - if (hp->sw_advertise & ADVERTISE_10HALF)
> - ASD("10H ");
> - if (hp->sw_advertise & ADVERTISE_10FULL)
> - ASD("10F ");
> - if (hp->sw_advertise & ADVERTISE_100HALF)
> - ASD("100H ");
> - if (hp->sw_advertise & ADVERTISE_100FULL)
> - ASD("100F ");
> -#endif
> + ASD("Advertising [ %s%s%s%s]\n",
> + hp->sw_advertise & ADVERTISE_10HALF ? "10H " : "",
> + hp->sw_advertise & ADVERTISE_10FULL ? "10F " : "",
> + hp->sw_advertise & ADVERTISE_100HALF ? "100H " : "",
> + hp->sw_advertise & ADVERTISE_100FULL ? "100F " :
"");
>
> /* Enable Auto-Negotiation, this is usually on
already... */
> hp->sw_bmcr |= BMCR_ANENABLE;

Completely independent of this driver, but I wonder if there is no generic
function to print these 10/100/* full/half duplex strings? There are several
drivers doing this as a quick grep shows.

Eike[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-09-19 15:24    [W:0.336 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site