lkml.org 
[lkml]   [2022]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] soundwire: bus: Fix wrong port number in sdw_handle_slave_alerts()
From


On 9/17/22 16:02, Richard Fitzgerald wrote:
> for_each_set_bit() gives the bit-number counting from 0 (LSbit==0).
> When processing INTSTAT2, bit 0 is DP4 so the port number is (bit + 4).
> Likewise for INTSTAT3 bit 0 is DP11 so port number is (bit + 11).
>
> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>

Another thing that never worked, but no one has used port interrupts so
far. I only used it for PRBS tests in early enabling some 3 years ago,
and it was for port 2 IIRC.

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

> ---
> drivers/soundwire/bus.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
> index 8eded1a55227..df0ae869ee51 100644
> --- a/drivers/soundwire/bus.c
> +++ b/drivers/soundwire/bus.c
> @@ -1622,7 +1622,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
> port = buf2[0] & SDW_SCP_INTSTAT2_PORT4_10;
> for_each_set_bit(bit, &port, 8) {
> /* scp2 ports start from 4 */
> - port_num = bit + 3;
> + port_num = bit + 4;
> sdw_handle_port_interrupt(slave,
> port_num,
> &port_status[port_num]);
> @@ -1634,7 +1634,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
> port = buf2[1] & SDW_SCP_INTSTAT3_PORT11_14;
> for_each_set_bit(bit, &port, 8) {
> /* scp3 ports start from 11 */
> - port_num = bit + 10;
> + port_num = bit + 11;
> sdw_handle_port_interrupt(slave,
> port_num,
> &port_status[port_num]);

\
 
 \ /
  Last update: 2022-09-19 10:54    [W:0.047 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site