lkml.org 
[lkml]   [2022]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: x15: kernel crash: LR is at sysc_enable_opt_clocks
Hi Arnd,

On Wed, 14 Sept 2022 at 19:19, Arnd Bergmann <arnd@arndb.de> wrote:
>
> On Wed, Sep 14, 2022, at 2:46 PM, Naresh Kamboju wrote:
> > Following kernel crash noticed on arm TI x15 device while booting the
> > mainline kernel 6.0.0-rc4.
> >
> > Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
> > [ 3.059600] random: crng init done
> > [ 3.059631] 8<--- cut here ---
> > [ 3.066101] Unable to handle kernel paging request at virtual
> > address adacafae
> > [ 3.073394] [adacafae] *pgd=00000000
> > [ 3.076995] Internal error: Oops: 5 [#1] SMP ARM
>
>
> > [ 3.781494] clk_enable from sysc_enable_opt_clocks+0x4c/0xa0
> > [ 3.787261] sysc_enable_opt_clocks from sysc_probe+0xda0/0x1598
> > [ 3.793304] sysc_probe from platform_probe+0x64/0xc0
>
> So it's getting an invalid clk pointer in sysc_enable_opt_clocks.
>
> > [ 3.798400] platform_probe from really_probe+0xe8/0x41c
> > [ 3.803741] really_probe from __driver_probe_device+0xa8/0x20c
> > [ 3.809692] __driver_probe_device from driver_probe_device+0x38/0xc8
> > [ 3.816192] driver_probe_device from __device_attach_driver+0xb4/0x130
> > [ 3.822845] __device_attach_driver from bus_for_each_drv+0x84/0xc8
> > [ 3.829162] bus_for_each_drv from __device_attach+0xb0/0x210
> > [ 3.834930] __device_attach from bus_probe_device+0x8c/0x94
> > [ 3.840637] bus_probe_device from device_add+0x3ec/0x924
> > [ 3.846069] device_add from of_platform_device_create_pdata+0x98/0xc8
> > [ 3.852630] of_platform_device_create_pdata from
> > of_platform_bus_create+0x200/0x4d8
> > [ 3.860412] of_platform_bus_create from of_platform_populate+0x9c/0x138
> > [ 3.867156] of_platform_populate from simple_pm_bus_probe+0xac/0xd0
> > [ 3.873565] simple_pm_bus_probe from platform_probe+0x64/0xc0
> > [ 3.879425] platform_probe from really_probe+0xe8/0x41c
>
> It looks strange to recursively go through simple_pm_bus_probe()
> here four times before getting to the ti,sysc driver.
>
> >
> > Full test log link,
> > - https://lkft.validation.linaro.org/scheduler/job/5508159
> >
>
> What is the easiest way to find out how long this job
> has been failing, and what the last successful build
> was?

It is not reproducible easily and I have checked when it got
started but failed to find it. Because on v6.0-rc3 kernel the x15
did not boot pass.

- Naresh

\
 
 \ /
  Last update: 2022-09-15 13:57    [W:0.076 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site