lkml.org 
[lkml]   [2022]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v9 4/4] PCI: endpoint: Add vNTB MSI support
On Tue, Sep 06, 2022 at 10:48:56PM -0500, Frank Li wrote:
> ┌───────┐ ┌──────────┐
> │ │ │ │
> ┌─────────────┐ │ PCI │ │ PCI Host │
> │ MSI │◄┐ │ EP │ │ │
> │ Controller │ │ │ │ 3.MSI Write │ │
> └────────┬────┘ └─┼───────┼───────────────────┤ │
> ▲ │ │ │ ├─BAR_n │
> │ └────────┼───────┼──────────────────►│ │
> │ │ │ 2.Call Back │ │
> │ │ │ write_msi_msg() │ │
> │ │ │ │ │
> │ └───┬───┘ └──────────┘
> │ │
> └───────────────────┘
> 1.platform_msi_domain_alloc_irqs()
>
> There is no defined way of raising IRQs by PCI host to the PCI endpoint.
> Only define MSI/MSI-X to let EP notified RC status change.
>
> The memory assigned for BAR region by the PCI host is mapped to the
> message address of platform msi interrupt controller in PCI Endpoint.
> Such that, whenever the PCI host writes to the BAR region, it will
> trigger an IRQ in the Endpoint.
>
> Basic working follow as
> 1. EP function driver call platform_msi_domain_alloc_irqs() alloc a
> MSI irq from MSI controller with call back function write_msi_msg();
> 2. write_msg_msg will config BAR and map to address defined in msi_msg;
> 3. Host side trigger an IRQ in Endpoint by write to BAR region.
>
> Add MSI support for pci-epf-vntb. Query if system has an MSI controller.
> Set up doorbell address according to struct msi_msg.
>
> So PCI RC can write this doorbell address to trigger EP side's IRQ.
>
> If no MSI controller exists, fall back to software polling.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> drivers/pci/endpoint/functions/pci-epf-vntb.c | 155 +++++++++++++++---
> 1 file changed, 128 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/pci/endpoint/functions/pci-epf-vntb.c b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> index 1466dd1904175..426205b980a09 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-vntb.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> @@ -44,6 +44,7 @@
> #include <linux/pci-epc.h>
> #include <linux/pci-epf.h>
> #include <linux/ntb.h>
> +#include <linux/msi.h>
>
> static struct workqueue_struct *kpcintb_workqueue;
>
> @@ -136,13 +137,15 @@ struct epf_ntb {
>
> struct epf_ntb_ctrl *reg;
>
> - phys_addr_t epf_db_phy;
> + phys_addr_t epf_db_phys;

This should be part of a separate patch.

> void __iomem *epf_db;
>
> phys_addr_t vpci_mw_phy[MAX_MW];
> void __iomem *vpci_mw_addr[MAX_MW];
>
> struct delayed_work cmd_handler;
> +
> + int msi_virqbase;
> };
>
> #define to_epf_ntb(epf_group) container_of((epf_group), struct epf_ntb, group)
> @@ -253,13 +256,15 @@ static void epf_ntb_cmd_handler(struct work_struct *work)
>
> ntb = container_of(work, struct epf_ntb, cmd_handler.work);
>
> - for (i = 1; i < ntb->db_count; i++) {
> - if (readl(ntb->epf_db + i * 4)) {
> - if (readl(ntb->epf_db + i * 4))
> - ntb->db |= 1 << (i - 1);
> + if (!ntb->epf_db_phys) {
> + for (i = 1; i < ntb->db_count; i++) {
> + if (readl(ntb->epf_db + i * 4)) {
> + if (readl(ntb->epf_db + i * 4))

Why are you reading twice? And why cannot you use _relaxed() variant
here and below?

> + ntb->db |= 1 << (i - 1);
>
> - ntb_db_event(&ntb->ntb, i);
> - writel(0, ntb->epf_db + i * 4);
> + ntb_db_event(&ntb->ntb, i);
> + writel(0, ntb->epf_db + i * 4);
> + }
> }
> }
>
> @@ -454,11 +459,9 @@ static int epf_ntb_config_spad_bar_alloc(struct epf_ntb *ntb)
> ctrl->num_mws = ntb->num_mws;
> ntb->spad_size = spad_size;
>
> - ctrl->db_entry_size = 4;
> -
> for (i = 0; i < ntb->db_count; i++) {
> ntb->reg->db_data[i] = 1 + i;
> - ntb->reg->db_offset[i] = 0;
> + ntb->reg->db_offset[i] = 4 * i;

4 should be defined as a macro of what it represents.

> }
>
> return 0;
> @@ -509,6 +512,28 @@ static int epf_ntb_configure_interrupt(struct epf_ntb *ntb)
> return 0;
> }
>
> +static int epf_ntb_db_size(struct epf_ntb *ntb)
> +{
> + const struct pci_epc_features *epc_features;
> + size_t size = 4 * ntb->db_count;

Here also.

> + u32 align;
> +
> + epc_features = pci_epc_get_features(ntb->epf->epc,
> + ntb->epf->func_no,
> + ntb->epf->vfunc_no);
> + align = epc_features->align;
> +
> + if (size < 128)
> + size = 128;
> +
> + if (align)
> + size = ALIGN(size, align);
> + else
> + size = roundup_pow_of_two(size);
> +
> + return size;
> +}
> +
> /**
> * epf_ntb_db_bar_init() - Configure Doorbell window BARs
> * @ntb: NTB device that facilitates communication between HOST and vHOST
> @@ -522,33 +547,32 @@ static int epf_ntb_db_bar_init(struct epf_ntb *ntb)
> struct pci_epf_bar *epf_bar;
> void __iomem *mw_addr;
> enum pci_barno barno;
> - size_t size = 4 * ntb->db_count;
> + size_t size;
>
> epc_features = pci_epc_get_features(ntb->epf->epc,
> ntb->epf->func_no,
> ntb->epf->vfunc_no);
> align = epc_features->align;
> -
> - if (size < 128)
> - size = 128;
> -
> - if (align)
> - size = ALIGN(size, align);
> - else
> - size = roundup_pow_of_two(size);
> + size = epf_ntb_db_size(ntb);
>
> barno = ntb->epf_ntb_bar[BAR_DB];
> + epf_bar = &ntb->epf->bar[barno];
>
> - mw_addr = pci_epf_alloc_space(ntb->epf, size, barno, align, 0);
> - if (!mw_addr) {
> - dev_err(dev, "Failed to allocate OB address\n");
> - return -ENOMEM;
> + if (ntb->epf_db_phys) {
> + mw_addr = NULL;
> + epf_bar->phys_addr = ntb->epf_db_phys;
> + epf_bar->barno = barno;
> + epf_bar->size = size;
> + } else {
> + mw_addr = pci_epf_alloc_space(ntb->epf, size, barno, align, 0);
> + if (!mw_addr) {
> + dev_err(dev, "Failed to allocate door bell address\n");

doorbell

> + return -ENOMEM;
> + }
> }
>
> ntb->epf_db = mw_addr;
>
> - epf_bar = &ntb->epf->bar[barno];
> -
> ret = pci_epc_set_bar(ntb->epf->epc, ntb->epf->func_no, ntb->epf->vfunc_no, epf_bar);
> if (ret) {
> dev_err(dev, "Doorbell BAR set failed\n");
> @@ -704,6 +728,82 @@ static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
> return 0;
> }
>
> +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
> +static void epf_ntb_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
> +{
> + struct epf_ntb *ntb = dev_get_drvdata(desc->dev);
> + struct epf_ntb_ctrl *reg = ntb->reg;
> + int size = epf_ntb_db_size(ntb);
> + u64 addr;
> +
> + addr = msg->address_hi;
> + addr <<= 32;
> + addr |= msg->address_lo;
> +
> + reg->db_data[desc->msi_index] = msg->data;
> +
> + if (desc->msi_index == 0)

if (!desc->msi_index)

> + ntb->epf_db_phys = round_down(addr, size);
> +
> + reg->db_offset[desc->msi_index] = addr - ntb->epf_db_phys;
> +}
> +#endif
> +
> +static irqreturn_t epf_ntb_interrupt_handler(int irq, void *data)
> +{
> + struct epf_ntb *ntb = data;
> + int index;
> +
> + index = irq - ntb->msi_virqbase;
> + ntb->db |= 1 << (index - 1);
> + ntb_db_event(&ntb->ntb, index);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void epf_ntb_epc_msi_init(struct epf_ntb *ntb)

Why cannot you guard this whole function with CONFIG_GENERIC_MSI_IRQ_DOMAIN?

> +{
> + struct device *dev = &ntb->epf->dev;
> + struct irq_domain *domain;
> + int virq;
> + int ret;
> + int i;
> +
> + domain = dev_get_msi_domain(ntb->epf->epc->dev.parent);
> + if (!domain)
> + return;
> +
> + dev_set_msi_domain(dev, domain);
> +
> +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
> + if (platform_msi_domain_alloc_irqs(&ntb->epf->dev,
> + ntb->db_count,
> + epf_ntb_write_msi_msg)) {
> + dev_info(dev, "Can't allocate MSI, fall back to poll mode\n");

falling back to polling mode

Should this be dev_err?

> + return;
> + }
> +#else
> + return;
> +#endif
> + dev_info(dev, "vntb use MSI as doorbell\n");

Using MSI as a doorbell

> +
> + for (i = 0; i < ntb->db_count; i++) {
> + virq = msi_get_virq(dev, i);
> + ret = devm_request_irq(dev, virq,
> + epf_ntb_interrupt_handler, 0,
> + "vntb", ntb);

s/vntb/pci_epf_vntb

> +
> + if (ret) {
> + dev_err(dev, "devm_request_irq() failure, fall back to poll mode\n");

Failed to request doorbell IRQ! Falling back to polling mode

> + ntb->epf_db_phys = 0;
> + break;
> + }
> +
> + if (!i)
> + ntb->msi_virqbase = virq;

A comment here would be helpful

Thanks,
Mani

> + }
> +}
> +
> /**
> * epf_ntb_epc_init() - Initialize NTB interface
> * @ntb: NTB device that facilitates communication between HOST and vHOST2
> @@ -1299,14 +1399,15 @@ static int epf_ntb_bind(struct pci_epf *epf)
> goto err_bar_alloc;
> }
>
> + epf_set_drvdata(epf, ntb);
> + epf_ntb_epc_msi_init(ntb);
> +
> ret = epf_ntb_epc_init(ntb);
> if (ret) {
> dev_err(dev, "Failed to initialize EPC\n");
> goto err_bar_alloc;
> }
>
> - epf_set_drvdata(epf, ntb);
> -
> pci_space[0] = (ntb->vntb_pid << 16) | ntb->vntb_vid;
> pci_vntb_table[0].vendor = ntb->vntb_vid;
> pci_vntb_table[0].device = ntb->vntb_pid;
> --
> 2.35.1
>

\
 
 \ /
  Last update: 2022-09-13 20:16    [W:0.219 / U:1.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site