lkml.org 
[lkml]   [2022]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 07/13] i2c: acpi: Use ACPI wake capability bit to set wake_irq
On Tue, Sep 13, 2022 at 1:28 AM Wolfram Sang <wsa@kernel.org> wrote:
>
> On Mon, Sep 12, 2022 at 04:13:11PM -0600, Raul E Rangel wrote:
> > Device tree already has a mechanism to pass the wake_irq. It does this
> > by looking for the wakeup-source property and setting the
> > I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses the
> > ACPI interrupt wake flag to determine if the interrupt can be used to
> > wake the system. Previously the i2c drivers had to make assumptions and
> > blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
> > If there is a device with an Active Low interrupt and the device gets
> > powered off while suspending, the interrupt line will go low since it's
> > no longer powered and wakes the system. For this reason we should
> > respect the board designers wishes and honor the wake bit defined on the
> > interrupt.
>
> I'll let the I2C ACPI maintainers deal with the technical details
> because they are the experts here, yet one minor thing hits my eye:
>

> > + irq_ctx.irq = acpi_dev_gpio_irq_get_wake(
> > + adev, 0, &irq_ctx.wake_capable);
>
> That line split looks weird with the open parens at the end of line 1.
>
Ah, looks like I missed `clang-format` on that line. I can fix it in
the next revision.

Thanks

\
 
 \ /
  Last update: 2022-09-13 19:09    [W:0.174 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site