lkml.org 
[lkml]   [2022]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 5.15 247/779] drm/meson: encoder_hdmi: switch to bridge DRM_BRIDGE_ATTACH_NO_CONNECTOR
    On 2022-08-15 19:58, Greg Kroah-Hartman wrote:
    > From: Neil Armstrong <narmstrong@baylibre.com>
    >
    > [ Upstream commit 0af5e0b41110e2da872030395231ab19c45be931 ]
    >
    > This implements the necessary change to no more use the embedded
    > connector in dw-hdmi and use the dedicated bridge connector driver
    > by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call.
    >
    > The necessary connector properties are added to handle the same
    > functionalities as the embedded dw-hdmi connector, i.e. the HDR
    > metadata, the CEC notifier & other flags.
    >
    > The dw-hdmi output_port is set to 1 in order to look for a connector
    > next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.

    HDMI on ODROID-N2+ was working with v5.15.60, and stopped working with
    v5.15.61. Reverting this commit (and two dependent refcount leak) to be
    the culprit. Reverting just the refcount leaks is not enough to get HDMI
    working, so I assume it is this commit.

    I haven't investigated much beyond that, maybe its simple a case of a
    missing kernel configuration? DRM_DISPLAY_CONNECTOR is compiled, and the
    module display_connector is loaded, so that part seemed to have worked.

    Any ideas welcome.

    FWIW, I track the issue in the HAOS tracker at
    https://github.com/home-assistant/operating-system/issues/2120.

    --
    Stefan

    >
    > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
    > Acked-by: Sam Ravnborg <sam@ravnborg.org>
    > Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
    > Link:
    > https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-5-narmstrong@baylibre.com
    > Signed-off-by: Sasha Levin <sashal@kernel.org>
    > ---
    > drivers/gpu/drm/meson/Kconfig | 2 +
    > drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 +
    > drivers/gpu/drm/meson/meson_encoder_hdmi.c | 81 +++++++++++++++++++++-
    > 3 files changed, 82 insertions(+), 2 deletions(-)
    >
    > diff --git a/drivers/gpu/drm/meson/Kconfig b/drivers/gpu/drm/meson/Kconfig
    > index 9f9281dd49f8..a4e1ed96e5e8 100644
    > --- a/drivers/gpu/drm/meson/Kconfig
    > +++ b/drivers/gpu/drm/meson/Kconfig
    > @@ -6,9 +6,11 @@ config DRM_MESON
    > select DRM_KMS_HELPER
    > select DRM_KMS_CMA_HELPER
    > select DRM_GEM_CMA_HELPER
    > + select DRM_DISPLAY_CONNECTOR
    > select VIDEOMODE_HELPERS
    > select REGMAP_MMIO
    > select MESON_CANVAS
    > + select CEC_CORE if CEC_NOTIFIER
    >
    > config DRM_MESON_DW_HDMI
    > tristate "HDMI Synopsys Controller support for Amlogic Meson Display"
    > diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c
    > b/drivers/gpu/drm/meson/meson_dw_hdmi.c
    > index fb540a503efe..5cd2b2ebbbd3 100644
    > --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
    > +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
    > @@ -803,6 +803,7 @@ static int meson_dw_hdmi_bind(struct device *dev,
    > struct device *master,
    > dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709;
    > dw_plat_data->ycbcr_420_allowed = true;
    > dw_plat_data->disable_cec = true;
    > + dw_plat_data->output_port = 1;
    >
    > if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") ||
    > dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") ||
    > diff --git a/drivers/gpu/drm/meson/meson_encoder_hdmi.c
    > b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
    > index db332fa4cd54..5e306de6f485 100644
    > --- a/drivers/gpu/drm/meson/meson_encoder_hdmi.c
    > +++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.c
    > @@ -14,8 +14,11 @@
    > #include <linux/regulator/consumer.h>
    > #include <linux/reset.h>
    >
    > +#include <media/cec-notifier.h>
    > +
    > #include <drm/drm_atomic_helper.h>
    > #include <drm/drm_bridge.h>
    > +#include <drm/drm_bridge_connector.h>
    > #include <drm/drm_device.h>
    > #include <drm/drm_edid.h>
    > #include <drm/drm_probe_helper.h>
    > @@ -34,8 +37,10 @@ struct meson_encoder_hdmi {
    > struct drm_encoder encoder;
    > struct drm_bridge bridge;
    > struct drm_bridge *next_bridge;
    > + struct drm_connector *connector;
    > struct meson_drm *priv;
    > unsigned long output_bus_fmt;
    > + struct cec_notifier *cec_notifier;
    > };
    >
    > #define bridge_to_meson_encoder_hdmi(x) \
    > @@ -50,6 +55,14 @@ static int meson_encoder_hdmi_attach(struct
    > drm_bridge *bridge,
    > &encoder_hdmi->bridge, flags);
    > }
    >
    > +static void meson_encoder_hdmi_detach(struct drm_bridge *bridge)
    > +{
    > + struct meson_encoder_hdmi *encoder_hdmi =
    > bridge_to_meson_encoder_hdmi(bridge);
    > +
    > + cec_notifier_conn_unregister(encoder_hdmi->cec_notifier);
    > + encoder_hdmi->cec_notifier = NULL;
    > +}
    > +
    > static void meson_encoder_hdmi_set_vclk(struct meson_encoder_hdmi
    > *encoder_hdmi,
    > const struct drm_display_mode *mode)
    > {
    > @@ -298,9 +311,30 @@ static int meson_encoder_hdmi_atomic_check(struct
    > drm_bridge *bridge,
    > return 0;
    > }
    >
    > +static void meson_encoder_hdmi_hpd_notify(struct drm_bridge *bridge,
    > + enum drm_connector_status status)
    > +{
    > + struct meson_encoder_hdmi *encoder_hdmi =
    > bridge_to_meson_encoder_hdmi(bridge);
    > + struct edid *edid;
    > +
    > + if (!encoder_hdmi->cec_notifier)
    > + return;
    > +
    > + if (status == connector_status_connected) {
    > + edid = drm_bridge_get_edid(encoder_hdmi->next_bridge,
    > encoder_hdmi->connector);
    > + if (!edid)
    > + return;
    > +
    > + cec_notifier_set_phys_addr_from_edid(encoder_hdmi->cec_notifier, edid);
    > + } else
    > + cec_notifier_phys_addr_invalidate(encoder_hdmi->cec_notifier);
    > +}
    > +
    > static const struct drm_bridge_funcs meson_encoder_hdmi_bridge_funcs = {
    > .attach = meson_encoder_hdmi_attach,
    > + .detach = meson_encoder_hdmi_detach,
    > .mode_valid = meson_encoder_hdmi_mode_valid,
    > + .hpd_notify = meson_encoder_hdmi_hpd_notify,
    > .atomic_enable = meson_encoder_hdmi_atomic_enable,
    > .atomic_disable = meson_encoder_hdmi_atomic_disable,
    > .atomic_get_input_bus_fmts = meson_encoder_hdmi_get_inp_bus_fmts,
    > @@ -313,6 +347,7 @@ static const struct drm_bridge_funcs
    > meson_encoder_hdmi_bridge_funcs = {
    > int meson_encoder_hdmi_init(struct meson_drm *priv)
    > {
    > struct meson_encoder_hdmi *meson_encoder_hdmi;
    > + struct platform_device *pdev;
    > struct device_node *remote;
    > int ret;
    >
    > @@ -337,6 +372,7 @@ int meson_encoder_hdmi_init(struct meson_drm *priv)
    > meson_encoder_hdmi->bridge.funcs = &meson_encoder_hdmi_bridge_funcs;
    > meson_encoder_hdmi->bridge.of_node = priv->dev->of_node;
    > meson_encoder_hdmi->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
    > + meson_encoder_hdmi->bridge.interlace_allowed = true;
    >
    > drm_bridge_add(&meson_encoder_hdmi->bridge);
    >
    > @@ -353,17 +389,58 @@ int meson_encoder_hdmi_init(struct meson_drm *priv)
    > meson_encoder_hdmi->encoder.possible_crtcs = BIT(0);
    >
    > /* Attach HDMI Encoder Bridge to Encoder */
    > - ret = drm_bridge_attach(&meson_encoder_hdmi->encoder,
    > &meson_encoder_hdmi->bridge, NULL, 0);
    > + ret = drm_bridge_attach(&meson_encoder_hdmi->encoder,
    > &meson_encoder_hdmi->bridge, NULL,
    > + DRM_BRIDGE_ATTACH_NO_CONNECTOR);
    > if (ret) {
    > dev_err(priv->dev, "Failed to attach bridge: %d\n", ret);
    > return ret;
    > }
    >
    > + /* Initialize & attach Bridge Connector */
    > + meson_encoder_hdmi->connector = drm_bridge_connector_init(priv->drm,
    > + &meson_encoder_hdmi->encoder);
    > + if (IS_ERR(meson_encoder_hdmi->connector)) {
    > + dev_err(priv->dev, "Unable to create HDMI bridge connector\n");
    > + return PTR_ERR(meson_encoder_hdmi->connector);
    > + }
    > + drm_connector_attach_encoder(meson_encoder_hdmi->connector,
    > + &meson_encoder_hdmi->encoder);
    > +
    > /*
    > * We should have now in place:
    > - * encoder->[hdmi encoder bridge]->[dw-hdmi bridge]->[dw-hdmi connector]
    > + * encoder->[hdmi encoder bridge]->[dw-hdmi bridge]->[display
    > connector bridge]->[display connector]
    > */
    >
    > + /*
    > + * drm_connector_attach_max_bpc_property() requires the
    > + * connector to have a state.
    > + */
    > + drm_atomic_helper_connector_reset(meson_encoder_hdmi->connector);
    > +
    > + if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL) ||
    > + meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
    > + meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
    > + drm_connector_attach_hdr_output_metadata_property(meson_encoder_hdmi->connector);
    > +
    > + drm_connector_attach_max_bpc_property(meson_encoder_hdmi->connector, 8, 8);
    > +
    > + /* Handle this here until handled by drm_bridge_connector_init() */
    > + meson_encoder_hdmi->connector->ycbcr_420_allowed = true;
    > +
    > + pdev = of_find_device_by_node(remote);
    > + if (pdev) {
    > + struct cec_connector_info conn_info;
    > + struct cec_notifier *notifier;
    > +
    > + cec_fill_conn_info_from_drm(&conn_info, meson_encoder_hdmi->connector);
    > +
    > + notifier = cec_notifier_conn_register(&pdev->dev, NULL, &conn_info);
    > + if (!notifier)
    > + return -ENOMEM;
    > +
    > + meson_encoder_hdmi->cec_notifier = notifier;
    > + }
    > +
    > dev_dbg(priv->dev, "HDMI encoder initialized\n");
    >
    > return 0;

    \
     
     \ /
      Last update: 2022-09-12 18:16    [W:4.961 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site