lkml.org 
[lkml]   [2022]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 3/4] dt-bindings: thermal: Add qcom,qmi-tmd-device and qcom,tmd-device yaml bindings
Date
On Mon, 12 Sep 2022 14:20:48 +0530, Bhupesh Sharma wrote:
> Add qcom,qmi-tmd-device and qcom,tmd-device yaml bindings.
>
> Qualcomm QMI based TMD cooling device(s) are used for various
> mitigations for remote subsystem(s) including remote processor
> mitigation, rail voltage restriction etc.
>
> Each child node represents one remote subsystem and each child
> of this subsystem in-turn represents separate TMD cooling device.
>
> Cc: daniel.lezcano@linaro.org
> Cc: rafael@kernel.org
> Cc: andersson@kernel.org
> Cc: robh@kernel.org
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
> .../bindings/thermal/qcom,qmi-tmd-device.yaml | 78 +++++++++++
> .../bindings/thermal/qcom,tmd-device.yaml | 122 ++++++++++++++++++
> include/dt-bindings/thermal/qcom,tmd.h | 14 ++
> 3 files changed, 214 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/qcom,qmi-tmd-device.yaml
> create mode 100644 Documentation/devicetree/bindings/thermal/qcom,tmd-device.yaml
> create mode 100644 include/dt-bindings/thermal/qcom,tmd.h
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,adsp.example.dtb: adsp: 'qcom,instance-id' is a required property
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/qcom,tmd-device.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,adsp.example.dtb: adsp: 'clock-names', 'clocks', 'compatible', 'cx-supply', 'interrupt-names', 'interrupts-extended', 'memory-region', 'qcom,smem-state-names', 'qcom,smem-states', 'smd-edge' do not match any of the regexes: '^tmd-device[0-9]?$', 'pinctrl-[0-9]+'
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/qcom,tmd-device.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

\
 
 \ /
  Last update: 2022-09-12 17:39    [W:0.080 / U:1.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site