lkml.org 
[lkml]   [2022]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/12] USB: serial: ftdi_sio: assume hi-speed type
Date
In preparation for adding further Hi-Speed types, assume a 120 MHz clock
and set the channel index by default and instead override these values
as needed for legacy types.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/serial/ftdi_sio.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index e772aacae562..a43101000ee3 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1552,13 +1552,15 @@ static int ftdi_determine_type(struct usb_serial_port *port)
version = le16_to_cpu(udev->descriptor.bcdDevice);
ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;

- priv->baud_base = 48000000 / 2;
- priv->channel = 0;
+ /* Assume Hi-Speed type */
+ priv->baud_base = 120000000 / 2;
+ priv->channel = CHANNEL_A + ifnum;

switch (version) {
case 0x200:
priv->chip_type = FT232A;
-
+ priv->baud_base = 48000000 / 2;
+ priv->channel = 0;
/*
* FT232B devices have a bug where bcdDevice gets set to 0x200
* when iSerialNumber is 0. Assume it is an FT232B in case the
@@ -1571,37 +1573,36 @@ static int ftdi_determine_type(struct usb_serial_port *port)
break;
case 0x400:
priv->chip_type = FT232B;
+ priv->baud_base = 48000000 / 2;
+ priv->channel = 0;
break;
case 0x500:
priv->chip_type = FT2232C;
- priv->channel = CHANNEL_A + ifnum;
+ priv->baud_base = 48000000 / 2;
break;
case 0x600:
priv->chip_type = FT232R;
+ priv->baud_base = 48000000 / 2;
+ priv->channel = 0;
break;
case 0x700:
priv->chip_type = FT2232H;
- priv->channel = CHANNEL_A + ifnum;
- priv->baud_base = 120000000 / 2;
break;
case 0x800:
priv->chip_type = FT4232H;
- priv->channel = CHANNEL_A + ifnum;
- priv->baud_base = 120000000 / 2;
break;
case 0x900:
priv->chip_type = FT232H;
- priv->channel = CHANNEL_A + ifnum;
- priv->baud_base = 120000000 / 2;
break;
case 0x1000:
priv->chip_type = FTX;
- priv->channel = CHANNEL_A + ifnum;
+ priv->baud_base = 48000000 / 2;
break;
default:
if (version < 0x200) {
priv->chip_type = SIO;
priv->baud_base = 12000000 / 16;
+ priv->channel = 0;
} else {
dev_err(&port->dev, "unknown device type: 0x%02x\n", version);
return -ENODEV;
--
2.35.1
\
 
 \ /
  Last update: 2022-09-11 16:04    [W:0.074 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site