lkml.org 
[lkml]   [2022]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/40] dt-bindings: pinctrl: qcom,sm6115-pinctrl: fix matching pin config
Date
Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:

'pins' is a required property
'function' is a required property
'rx', 'tx' do not match any of the regexes: 'pinctrl-[0-9]+'
[[59]] is not of type 'object'

Make the schema stricter and expect such nodes to be either named
'pinconfig' or followed with '-pins' prefix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/pinctrl/qcom,sm6115-pinctrl.yaml | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
index d8443811767d..8a2b4767c7b6 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml
@@ -59,8 +59,9 @@ patternProperties:
oneOf:
- $ref: "#/$defs/qcom-sm6115-tlmm-state"
- patternProperties:
- ".*":
+ "-pins$":
$ref: "#/$defs/qcom-sm6115-tlmm-state"
+ additionalProperties: false

'$defs':
qcom-sm6115-tlmm-state:
@@ -155,25 +156,25 @@ examples:
gpio-ranges = <&tlmm 0 0 114>;

sdc2_on_state: sdc2-on-state {
- clk {
+ clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};

- cmd {
+ cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};

- data {
+ data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};

- sd-cd {
+ sd-cd-pins {
pins = "gpio88";
function = "gpio";
bias-pull-up;
--
2.34.1
\
 
 \ /
  Last update: 2022-09-11 13:12    [W:0.325 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site