lkml.org 
[lkml]   [2022]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] asus-wmi: Increase FAN_CURVE_BUF_LEN to 32
From
Hi All,

On 8/29/22 15:35, Guenter Roeck wrote:
> On Sun, Aug 28, 2022 at 07:46:38PM +1200, Luke D. Jones wrote:
>> Fix for TUF laptops returning with an -ENOSPC on calling
>> asus_wmi_evaluate_method_buf() when fetching default curves. The TUF method
>> requires at least 32 bytes space.
>>
>> This also moves and changes the pr_debug() in fan_curve_check_present() to
>> pr_warn() in fan_curve_get_factory_default() so that there is at least some
>> indication in logs of why it fails.
>>
>> Signed-off-by: Luke D. Jones <luke@ljones.dev>
>> ---
>> drivers/platform/x86/asus-wmi.c | 9 ++++-----
>> 1 file changed, 4 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
>> index 3d9fd58573f9..11203213e00d 100644
>> --- a/drivers/platform/x86/asus-wmi.c
>> +++ b/drivers/platform/x86/asus-wmi.c
>> @@ -108,7 +108,7 @@ module_param(fnlock_default, bool, 0444);
>> #define WMI_EVENT_MASK 0xFFFF
>>
>> #define FAN_CURVE_POINTS 8
>> -#define FAN_CURVE_BUF_LEN (FAN_CURVE_POINTS * 2)
>> +#define FAN_CURVE_BUF_LEN 32
>> #define FAN_CURVE_DEV_CPU 0x00
>> #define FAN_CURVE_DEV_GPU 0x01
>> /* Mask to determine if setting temperature or percentage */
>> @@ -2383,8 +2383,10 @@ static int fan_curve_get_factory_default(struct asus_wmi *asus, u32 fan_dev)
>> curves = &asus->custom_fan_curves[fan_idx];
>> err = asus_wmi_evaluate_method_buf(asus->dsts_id, fan_dev, mode, buf,
>> FAN_CURVE_BUF_LEN);
>> - if (err)
>> + if (err) {
>> + pr_warn("%s (0x%08x) failed: %d\n", __func__, fan_dev, err);
>> return err;
>> + }
>>
>> fan_curve_copy_from_buf(curves, buf);
>> curves->device_id = fan_dev;
>> @@ -2402,9 +2404,6 @@ static int fan_curve_check_present(struct asus_wmi *asus, bool *available,
>>
>> err = fan_curve_get_factory_default(asus, fan_dev);
>> if (err) {
>> - pr_debug("fan_curve_get_factory_default(0x%08x) failed: %d\n",
>> - fan_dev, err);
>> - /* Don't cause probe to fail on devices without fan-curves */
>
> The pr_warn() should be here. If you want to have a message from the call
> in fan_curve_enable_store(), add dev_err() there.

Guenter I can understand where you are coming from with the warn vs err
thing but IMHO that is a minor concern and I'm actually a fan of pushing
error logging closer to the first failing call so that we only have
one place to log the error instead of having to log it separately in
all the callers.

So I'm going to take this patch as is.

Regards,

Hans

\
 
 \ /
  Last update: 2022-09-01 16:59    [W:0.059 / U:0.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site