lkml.org 
[lkml]   [2022]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH rcu 04/32] rcu-tasks: Drive synchronous grace periods from calling task
From
Hi Paul,

On Mon, Jun 20, 2022 at 03:53:43PM -0700, Paul E. McKenney wrote:
> This commit causes synchronous grace periods to be driven from the task
> invoking synchronize_rcu_*(), allowing these functions to be invoked from
> the mid-boot dead zone extending from when the scheduler was initialized
> to to point that the various RCU tasks grace-period kthreads are spawned.
> This change will allow the self-tests to run in a consistent manner.
>
> Reported-by: Matthew Wilcox <willy@infradead.org>
> Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit (appeared in mainline as 4a8cc433b8bf) breaks booting my
ARMv7 based i.MX6ul board when CONFIG_PROVE_RCU is enabled. Reverting
this patch on v6.0-rc3 makes my board boot again. See below for a boot
log. The last message is "Running RCU-tasks wait API self tests", after
that the board hangs. Any idea what goes wrong here?

Sascha

----------------------------8<-----------------------------

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.19.0-rc3-00004-g4a8cc433b8bf (sha@dude02) (arm-v7a-linux-gnueabihf-gcc (OSELAS.Toolchain-2021.07.0 11-20210703) 11.1.1 20210703, GNU ld (GNU Binutils) 2.36.1) #229 SMP Thu Sep 1 12:00:07 CEST 2022
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: IDS CU33X
[ 0.000000] earlycon: ec_imx6q0 at MMIO 0x02020000 (options '')
[ 0.000000] printk: bootconsole [ec_imx6q0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 64 MiB at 0x8c000000
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000080000000-0x000000008fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000008fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000008fffffff]
[ 0.000000] percpu: Embedded 17 pages/cpu s38068 r8192 d23372 u69632
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=ttymxc0,115200n8 earlycon ip=dhcp root=/dev/nfs nfsroot=192.168.8.12:/hom
e/sha/nfsroot/cu33x,v3,tcp
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 162600K/262144K available (15360K kernel code, 2146K rwdata, 5472K rodata, 1024K init, 6681K b
ss, 34008K reserved, 65536K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] Running RCU self tests
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU lockdep checking is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] Switching to timer-based delay loop, resolution 41ns
[ 0.000003] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.007810] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.021748] Console: colour dummy device 80x30
[ 0.023488] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.032009] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.035282] ... MAX_LOCK_DEPTH: 48
[ 0.039445] ... MAX_LOCKDEP_KEYS: 8192
[ 0.043886] ... CLASSHASH_SIZE: 4096
[ 0.048127] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.052552] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.057069] ... CHAINHASH_SIZE: 32768
[ 0.061405] memory used by lock dependency info: 4061 kB
[ 0.066788] memory used for stack traces: 2112 kB
[ 0.071645] per task-struct memory footprint: 1536 bytes
[ 0.077138] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.087384] pid_max: default: 32768 minimum: 301
[ 0.093527] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.099327] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.116798] CPU: Testing write buffer coherency: ok
[ 0.122036] CPU0: update cpu_capacity 1024
[ 0.123381] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.137390] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.142282] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.149333] Running RCU-tasks wait API self tests

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2022-09-01 12:38    [W:0.115 / U:0.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site