lkml.org 
[lkml]   [2022]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/4] memblock tests: add top-down NUMA tests for memblock_alloc_try_nid*
On Sat, Aug 27, 2022 at 12:53:00AM -0500, Rebecca Mckeever wrote:
> Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
> where the simulated physical memory is set up with multiple NUMA nodes.
> Additionally, all of these tests set nid != NUMA_NO_NODE. These tests are
> run with a top-down allocation direction.
>
> The tested scenarios are:
>
> Range unrestricted:
> - region can be allocated in the specific node requested:
> + there are no previously reserved regions
> + the requested node is partially reserved but has enough space
> - the specific node requested cannot accommodate the request, but the
> region can be allocated in a different node:
> + there are no previously reserved regions, but node is too small
> + the requested node is fully reserved
> + the requested node is partially reserved and does not have
> enough space
>
> Range restricted:
> - region can be allocated in the specific node requested after dropping
> min_addr:
> + range partially overlaps with two different nodes, where the first
> node is the requested node
> + range partially overlaps with two different nodes, where the
> requested node ends before min_addr
> - region cannot be allocated in the specific node requested, but it can be
> allocated in the requested range:
> + range overlaps with multiple nodes along node boundaries, and the
> requested node ends before min_addr
> + range overlaps with multiple nodes along node boundaries, and the
> requested node starts after max_addr
> - region cannot be allocated in the specific node requested, but it can be
> allocated after dropping min_addr:
> + range partially overlaps with two different nodes, where the
> second node is the requested node
>
> Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
> ---
> tools/testing/memblock/tests/alloc_nid_api.c | 702 ++++++++++++++++++-
> tools/testing/memblock/tests/alloc_nid_api.h | 16 +
> tools/testing/memblock/tests/common.h | 18 +
> 3 files changed, 725 insertions(+), 11 deletions(-)
>
> diff --git a/tools/testing/memblock/tests/alloc_nid_api.c b/tools/testing/memblock/tests/alloc_nid_api.c
> index 32b3c1594fdd..e5ef93ea1ce5 100644
> --- a/tools/testing/memblock/tests/alloc_nid_api.c
> +++ b/tools/testing/memblock/tests/alloc_nid_api.c
> @@ -1094,7 +1094,7 @@ static int alloc_try_nid_bottom_up_cap_min_check(void)
> return 0;
> }
>
> -/* Test case wrappers */
> +/* Test case wrappers for range tests */
> static int alloc_try_nid_simple_check(void)
> {
> test_print("\tRunning %s...\n", __func__);
> @@ -1226,17 +1226,10 @@ static int alloc_try_nid_low_max_check(void)
> return 0;
> }
>
> -static int memblock_alloc_nid_checks_internal(int flags)
> +static int memblock_alloc_nid_range_checks(void)
> {
> - const char *func = get_memblock_alloc_try_nid_name(flags);
> -
> - alloc_nid_test_flags = flags;
> - prefix_reset();
> - prefix_push(func);
> - test_print("Running %s tests...\n", func);
> -
> - reset_memblock_attributes();
> - dummy_physical_memory_init();
> + test_print("Running %s range tests...\n",
> + get_memblock_alloc_try_nid_name(alloc_nid_test_flags));
>
> alloc_try_nid_simple_check();
> alloc_try_nid_misaligned_check();
> @@ -1253,6 +1246,693 @@ static int memblock_alloc_nid_checks_internal(int flags)
> alloc_try_nid_reserved_all_check();
> alloc_try_nid_low_max_check();
>
> + return 0;
> +}
> +
> +/*
> + * A test that tries to allocate a memory region in a specific NUMA node that
> + * has enough memory to allocate a region of the requested size.
> + * Expect to allocate an aligned region at the end of the requested node.
> + */
> +static int alloc_try_nid_top_down_numa_simple_check(void)
> +{
> + int nid_req = 3;
> + struct memblock_region *new_rgn = &memblock.reserved.regions[0];
> + struct memblock_region *req_node = &memblock.memory.regions[nid_req];
> + void *allocated_ptr = NULL;
> +
> + PREFIX_PUSH();
> +
> + phys_addr_t size;
> + phys_addr_t min_addr;
> + phys_addr_t max_addr;
> +
> + setup_numa_memblock();
> +
> + ASSERT_LE(SZ_4, req_node->size);
> + size = req_node->size / SZ_4;
> + min_addr = memblock_start_of_DRAM();
> + max_addr = memblock_end_of_DRAM();
> +
> + allocated_ptr = run_memblock_alloc_try_nid(size, SMP_CACHE_BYTES,
> + min_addr, max_addr, nid_req);
> +
> + ASSERT_NE(allocated_ptr, NULL);
> + assert_mem_content(allocated_ptr, size, alloc_nid_test_flags);
> +
> + ASSERT_EQ(new_rgn->size, size);
> + ASSERT_EQ(new_rgn->base, region_end(req_node) - size);
> + ASSERT_LE(req_node->base, new_rgn->base);
> +
> + ASSERT_EQ(memblock.reserved.cnt, 1);
> + ASSERT_EQ(memblock.reserved.total_size, size);
> +
> + test_pass_pop();
> +
> + return 0;
> +}
> +
> +/*
> + * A test that tries to allocate a memory region in a specific NUMA node that
> + * does not have enough memory to allocate a region of the requested size:
> + *
> + * | +-----+ +------------------+ |
> + * | | req | | expected | |
> + * +---+-----+----------+------------------+-----+
> + *
> + * | +---------+ |
> + * | | rgn | |
> + * +-----------------------------+---------+-----+
> + *
> + * Expect to allocate an aligned region at the end of the last node that has
> + * enough memory (in this case, nid = 6) after falling back to NUMA_NO_NODE.
> + */
> +static int alloc_try_nid_top_down_numa_small_node_check(void)
> +{
> + int nid_req = 1;
> + int nid_exp = 6;
> + struct memblock_region *new_rgn = &memblock.reserved.regions[0];
> + struct memblock_region *exp_node = &memblock.memory.regions[nid_exp];

AFAIU, having required and expected nodes here means very tight relation
between the NUMA layout used by setup_numa_memblock() and the test cases.

I believe it would be clearer and less error prone if the relation were
more explicit.

Can't say I have a great ideas how to achieve this, but maybe its worth
passing NUMA layout to setup_numa_memblock() every time, or setting the
requested and expected nid based on the NUMA layout, or maybe something
smarted than either of these.

> + void *allocated_ptr = NULL;
> +
> + PREFIX_PUSH();
> +
> + phys_addr_t size;
> + phys_addr_t min_addr;
> + phys_addr_t max_addr;
> +
> + setup_numa_memblock();
> +
> + size = SZ_2K * MEM_FACTOR;
> + min_addr = memblock_start_of_DRAM();
> + max_addr = memblock_end_of_DRAM();
> +
> + allocated_ptr = run_memblock_alloc_try_nid(size, SMP_CACHE_BYTES,
> + min_addr, max_addr, nid_req);
> +
> + ASSERT_NE(allocated_ptr, NULL);
> + assert_mem_content(allocated_ptr, size, alloc_nid_test_flags);
> +
> + ASSERT_EQ(new_rgn->size, size);
> + ASSERT_EQ(new_rgn->base, region_end(exp_node) - size);
> + ASSERT_LE(exp_node->base, new_rgn->base);
> +
> + ASSERT_EQ(memblock.reserved.cnt, 1);
> + ASSERT_EQ(memblock.reserved.total_size, size);
> +
> + test_pass_pop();
> +
> + return 0;
> +}
> +

--
Sincerely yours,
Mike.

\
 
 \ /
  Last update: 2022-09-01 11:01    [W:0.048 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site