lkml.org 
[lkml]   [2022]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/3] dt-bindings: spi: stm32: Add st,dual-flash property in st,stm32-qspi.yaml
From
On 08/08/2022 19:08, Patrice CHOTARD wrote:
> Hi Krzystof
>
> On 8/8/22 11:01, Krzysztof Kozlowski wrote:
>> On 08/08/2022 10:40, patrice.chotard@foss.st.com wrote:
>>> From: Patrice Chotard <patrice.chotard@foss.st.com>
>>>
>>> Add new property st,dual-flash which allows to use the QSPI interface as a
>>> communication channel using up to 8 qspi line.
>>> This mode can only be used if cs-gpios property is defined.
>>>
>>> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
>>> ---
>>> Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml | 8 ++++++++
>>> 1 file changed, 8 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
>>> index 6ec6f556182f..5e4f9109799e 100644
>>> --- a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
>>> +++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
>>> @@ -46,6 +46,14 @@ properties:
>>> - const: tx
>>> - const: rx
>>>
>>> + st,dual-flash:
>>> + type: boolean
>>> + description:
>>> + Allows to use 8 data lines in case cs-gpios property is defined.
>>
>> It's named dual-flash, but what if you want to use QSPI to connect for
>> example to FPGA?
>>
>> Also how is this related to parallel-memories property?
>
> I called it "dual-flash" simply because it enable the dual flash feature of the QSPI block (bit CR_DFM : Dual Flash Mode)
> which allows to use the 8 lines simultaneously of our dual QSPI block.

And how is it related to existing parallel-memories property?

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-08-09 06:19    [W:0.100 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site