lkml.org 
[lkml]   [2022]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Input: joystick: xpad: Add X-Box Adaptive Controller support
Date
Adds support for the X-Box Adaptive Controller, which is protocol
compatible with the XTYPE_XBOXONE support in the driver with two deltas:

- The X-Box button sets 0x02 as its activation ID, where others set
0x01
- The controller has an additional "Layer" button with 4 active states,
which this change maps to an Axis control with 4 possible values

Signed-off-by: Nate Yocom <nate@yocom.org>
---
drivers/input/joystick/xpad.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 18190b529bca..0d02d88790b6 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -80,6 +80,7 @@
#define MAP_TRIGGERS_TO_BUTTONS (1 << 1)
#define MAP_STICKS_TO_NULL (1 << 2)
#define MAP_SELECT_BUTTON (1 << 3)
+#define MAP_LAYER_BUTTON (1 << 4)
#define DANCEPAD_MAP_CONFIG (MAP_DPAD_TO_BUTTONS | \
MAP_TRIGGERS_TO_BUTTONS | MAP_STICKS_TO_NULL)

@@ -131,6 +132,7 @@ static const struct xpad_device {
{ 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", 0, XTYPE_XBOXONE },
{ 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE },
{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
+ { 0x045e, 0x0b0a, "Microsoft X-Box Adaptive Controller", MAP_LAYER_BUTTON, XTYPE_XBOXONE },
{ 0x045e, 0x0b12, "Microsoft Xbox Series S|X Controller", MAP_SELECT_BUTTON, XTYPE_XBOXONE },
{ 0x046d, 0xc21d, "Logitech Gamepad F310", 0, XTYPE_XBOX360 },
{ 0x046d, 0xc21e, "Logitech Gamepad F510", 0, XTYPE_XBOX360 },
@@ -857,7 +859,17 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
if (data[1] == 0x30)
xpadone_ack_mode_report(xpad, data[2]);

- input_report_key(dev, BTN_MODE, data[4] & 0x01);
+ /*
+ * X-Box Adaptive controller sets 0x02 when x-box button is pressed,
+ * we could probably condense into just data[4] != 0, but explicitly
+ * checking here ensures no regression if other devices set other bits.
+ */
+ if (le16_to_cpu(xpad->dev->id.vendor) == 0x045e &&
+ le16_to_cpu(xpad->dev->id.product) == 0x0b0a)
+ input_report_key(dev, BTN_MODE, data[4] & 0x02);
+ else
+ input_report_key(dev, BTN_MODE, data[4] & 0x01);
+
input_sync(dev);
return;
}
@@ -926,6 +938,10 @@ static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char
(__u16) le16_to_cpup((__le16 *)(data + 8)));
}

+ /* Layer button has a value of 0-4, so its reported as an axis */
+ if (xpad->mapping & MAP_LAYER_BUTTON)
+ input_report_abs(dev, ABS_MISC, data[34]);
+
input_sync(dev);
}

@@ -1622,6 +1638,8 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
case ABS_HAT0Y: /* the d-pad (only if dpad is mapped to axes */
input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
break;
+ case ABS_MISC: /* 4 value layer button (such as on the XAC) */
+ input_set_abs_params(input_dev, abs, 0, 4, 0, 0);
default:
input_set_abs_params(input_dev, abs, 0, 0, 0, 0);
break;
@@ -1714,6 +1732,10 @@ static int xpad_init_input(struct usb_xpad *xpad)
xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);
}

+ /* setup layer buton as an axis with 4 possible values */
+ if (xpad->mapping & MAP_LAYER_BUTTON)
+ xpad_set_up_abs(input_dev, ABS_MISC);
+
error = xpad_init_ff(xpad);
if (error)
goto err_free_input;
--
2.30.2
\
 
 \ /
  Last update: 2022-08-10 02:21    [W:0.193 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site