lkml.org 
[lkml]   [2022]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 4/6] asus-wmi: Document previously added attributes
On Mon, Aug 8, 2022 at 5:09 AM Luke D. Jones <luke@ljones.dev> wrote:
>
> Documents some previously added attributes:
> - dgpu_disable
> - egpu_enable
> - panel_od
> - keyboard_rgb_mode
> - keyboard_rgb_state

...

> +What: /sys/devices/platform/<platform>/dgpu_disable
> +Date: Aug 2022
> +KernelVersion: 5.17
> +Contact: "Luke Jones" <luke@ljones.dev>
> +Description:
> + Disable discrete GPU:
> + * 0 - Enable dGPU,
> + * 1 - Disable dGPU,
> +
> +What: /sys/devices/platform/<platform>/egpu_enable
> +Date: Aug 2022
> +KernelVersion: 5.17
> +Contact: "Luke Jones" <luke@ljones.dev>
> +Description:
> + Enable the external GPU paired with ROG X-Flow laptops.
> + Toggling this setting will also trigger ACPI to disable the dGPU:
> + * 0 - Disable,
> + * 1 - Enable,
> +
> +What: /sys/devices/platform/<platform>/panel_od
> +Date: Aug 2022
> +KernelVersion: 5.17
> +Contact: "Luke Jones" <luke@ljones.dev>
> +Description:
> + Enable an LCD response-time boost to reduce or remove ghosting:
> + * 0 - Disable,
> + * 1 - Enable,

These should be in separate patch(es) with the corresponding Fixes
tags. (The latter may not be so important, though. I leave it to Hans
to decide)

...

> +What: /sys/devices/platform/<platform>/keyboard_rgb_mode
> +Date: Aug 2022
> +KernelVersion: 6.0

These should go separately. Dunno if it should be a separate
documentation change for the both, or should it be split and
reattached to the respective patches from the series. Up to Hans.

> +Contact: "Luke Jones" <luke@ljones.dev>
> +Description:
> + Set some RGB keyboard modes and features (write-only).
> +
> + The accepted input is "save mode speed", where "n n n" options
> + are:
> + * save - 0 or 1, if 0 then settings are not retained on boot
> + * mode - 0 to 12, each is an RGB such as static, rainbow, pulse.
> + Not all keyboards accept every mode.
> + * speed - 0, 1, 2, equal to low, medium, high.
> + Only applies to certain modes.
> +
> +What: /sys/devices/platform/<platform>/keyboard_rgb_state
> +Date: Aug 2022
> +KernelVersion: 6.0
> +Contact: "Luke Jones" <luke@ljones.dev>
> +Description:
> + Set some RGB keyboard power states (write-only).
> +
> + The accepted input is "boot awake sleep keyboard", where "n n n n n"
> + options are:
> + * save - 0 or 1, if 0 then settings are not retained on boot
> + * boot - 0 or 1, controls if a boot animation is shown
> + * awake - 0 or 1, controls if the keyboard LED are on during awake
> + * sleep - 0 or 1, controls if a suspended animation is shown.
> + This is only active if the AC is connected.
> + * keyboard - 0 or 1, unknown what effect this really has


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2022-08-08 18:12    [W:0.116 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site