lkml.org 
[lkml]   [2022]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/4] Add support for Microchip QSPI controller
Date
This patch enables the Microchip's FPGA QSPI and Polarfire SoC QSPI
controller support.

Tested spi-nand (W25N01GV) and spi-nor (MT25QL256A) on Microchip's
ICICLE kit. tested using both FPGA QSPI and Polarfie SoC QSPI.

changes in v4
-------------
1. Removed microchip,mpfs-qspi compatible from the driver
2. Changed platform_get_irq() return value check from <=0 to <0
3. Fixed dt_binding_check warning by installing latest yamllint

changes in v3
------------
1. Added dev_err_probe() at places like probe failures
2. Split the dt-bindings one for adding coreqspi compatible
and other one to add coreqspi as fallback to mpfs-qspi.

changes in v2
------------
1. Replaced spi_alloc_master() with devm_spi_alloc_master()
2. Used dev_err_probe() when devm_spi_alloc_master() fails.
3. Added shared IRQ flag in the interrupt registration.
4. Updated the dt_bindings so that there is a differentiation
between FPGA QSPI IP core and hard QSPI IP core.

Naga Sureshkumar Relli (4):
spi: dt-binding: document microchip coreQSPI
spi: dt-binding: add coreqspi as a fallback for mpfs-qspi
spi: microchip-core-qspi: Add support for microchip fpga qspi
controllers
MAINTAINERS: add qspi to Polarfire SoC entry

.../bindings/spi/microchip,mpfs-spi.yaml | 15 +-
MAINTAINERS | 1 +
drivers/spi/Kconfig | 9 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-microchip-core-qspi.c | 600 ++++++++++++++++++
5 files changed, 622 insertions(+), 4 deletions(-)
create mode 100644 drivers/spi/spi-microchip-core-qspi.c

--
2.25.1

\
 
 \ /
  Last update: 2022-08-08 08:47    [W:0.094 / U:1.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site