lkml.org 
[lkml]   [2022]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v1 23/26] thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function
From
Hi,

On 8/5/22 16:57, Daniel Lezcano wrote:
> The thermal framework gives the possibility to register the trip
> points with the thermal zone. When that is done, no get_trip_* ops are
> needed and they can be removed.
>
> Convert ops content logic into generic trip points and register them with the
> thermal zone.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Thanks, patch looks good to me, feel free to merge this
through the thermal tree together with the rest of the series:

Acked-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans

> ---
> drivers/platform/x86/acerhdf.c | 73 ++++++++++++----------------------
> 1 file changed, 26 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
> index 3463629f8764..cf757f3a1e6b 100644
> --- a/drivers/platform/x86/acerhdf.c
> +++ b/drivers/platform/x86/acerhdf.c
> @@ -46,6 +46,8 @@
> * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
> * assume 89°C is critical temperature.
> */
> +#define ACERHDF_DEFAULT_TEMP_FANON 60000
> +#define ACERHDF_DEFAULT_TEMP_FANOFF 53000
> #define ACERHDF_TEMP_CRIT 89000
> #define ACERHDF_FAN_OFF 0
> #define ACERHDF_FAN_AUTO 1
> @@ -70,8 +72,8 @@ static int kernelmode;
> #endif
>
> static unsigned int interval = 10;
> -static unsigned int fanon = 60000;
> -static unsigned int fanoff = 53000;
> +static unsigned int fanon = ACERHDF_DEFAULT_TEMP_FANON;
> +static unsigned int fanoff = ACERHDF_DEFAULT_TEMP_FANOFF;
> static unsigned int verbose;
> static unsigned int list_supported;
> static unsigned int fanstate = ACERHDF_FAN_AUTO;
> @@ -137,6 +139,15 @@ struct ctrl_settings {
> int mcmd_enable;
> };
>
> +static struct thermal_trip trips[] = {
> + [0] = { .temperature = ACERHDF_DEFAULT_TEMP_FANON,
> + .hysteresis = ACERHDF_DEFAULT_TEMP_FANON - ACERHDF_DEFAULT_TEMP_FANOFF,
> + .type = THERMAL_TRIP_ACTIVE },
> +
> + [1] = { .temperature = ACERHDF_TEMP_CRIT,
> + .type = THERMAL_TRIP_CRITICAL }
> +};
> +
> static struct ctrl_settings ctrl_cfg __read_mostly;
>
> /* Register addresses and values for different BIOS versions */
> @@ -326,6 +337,15 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal)
> fanon = ACERHDF_MAX_FANON;
> }
>
> + if (fanon < fanoff) {
> + pr_err("fanoff temperature (%d) is above fanon temperature (%d), clamping to %d\n",
> + fanoff, fanon, fanon);
> + fanoff = fanon;
> + };
> +
> + trips[0].temperature = fanon;
> + trips[0].hysteresis = fanon - fanoff;
> +
> if (kernelmode && prev_interval != interval) {
> if (interval > ACERHDF_MAX_INTERVAL) {
> pr_err("interval too high, set to %d\n",
> @@ -424,43 +444,6 @@ static int acerhdf_change_mode(struct thermal_zone_device *thermal,
> return 0;
> }
>
> -static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
> - enum thermal_trip_type *type)
> -{
> - if (trip == 0)
> - *type = THERMAL_TRIP_ACTIVE;
> - else if (trip == 1)
> - *type = THERMAL_TRIP_CRITICAL;
> - else
> - return -EINVAL;
> -
> - return 0;
> -}
> -
> -static int acerhdf_get_trip_hyst(struct thermal_zone_device *thermal, int trip,
> - int *temp)
> -{
> - if (trip != 0)
> - return -EINVAL;
> -
> - *temp = fanon - fanoff;
> -
> - return 0;
> -}
> -
> -static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
> - int *temp)
> -{
> - if (trip == 0)
> - *temp = fanon;
> - else if (trip == 1)
> - *temp = ACERHDF_TEMP_CRIT;
> - else
> - return -EINVAL;
> -
> - return 0;
> -}
> -
> static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
> int *temperature)
> {
> @@ -474,13 +457,9 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
> .unbind = acerhdf_unbind,
> .get_temp = acerhdf_get_ec_temp,
> .change_mode = acerhdf_change_mode,
> - .get_trip_type = acerhdf_get_trip_type,
> - .get_trip_hyst = acerhdf_get_trip_hyst,
> - .get_trip_temp = acerhdf_get_trip_temp,
> .get_crit_temp = acerhdf_get_crit_temp,
> };
>
> -
> /*
> * cooling device callback functions
> * get maximal fan cooling state
> @@ -710,10 +689,10 @@ static int __init acerhdf_register_thermal(void)
> if (IS_ERR(cl_dev))
> return -EINVAL;
>
> - thz_dev = thermal_zone_device_register("acerhdf", 2, 0, NULL,
> - &acerhdf_dev_ops,
> - &acerhdf_zone_params, 0,
> - (kernelmode) ? interval*1000 : 0);
> + thz_dev = thermal_zone_device_register_with_trips("acerhdf", trips, ARRAY_SIZE(trips),
> + 0, NULL, &acerhdf_dev_ops,
> + &acerhdf_zone_params, 0,
> + (kernelmode) ? interval*1000 : 0);
> if (IS_ERR(thz_dev))
> return -EINVAL;
>

\
 
 \ /
  Last update: 2022-08-08 16:57    [W:1.284 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site