lkml.org 
[lkml]   [2022]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/9] docs: i2c: smbus-protocol: improve DataLow/DataHigh definition
Date
From: Luca Ceresoli <luca.ceresoli@bootlin.com>

Use a more professional wording.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
Documentation/i2c/smbus-protocol.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index 55e209c7e520..4942c4cad4ad 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -45,8 +45,8 @@ Addr (7 bits) I2C 7 bit address. Note that this can be expanded to
get a 10 bit I2C address.
Comm (8 bits) Command byte, a data byte which often selects a register on
the device.
-Data (8 bits) A plain data byte. Sometimes, I write DataLow, DataHigh
- for 16 bit data.
+Data (8 bits) A plain data byte. DataLow and DataHigh represent the low and
+ high byte of a 16 bit word.
Count (8 bits) A data byte containing the length of a block operation.

[..] Data sent by I2C device, as opposed to data sent by the host
--
2.34.1
\
 
 \ /
  Last update: 2022-08-08 16:18    [W:0.130 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site