lkml.org 
[lkml]   [2022]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH] i2c: qcom-geni: Fix GPI DMA buffer sync-back
From


On 7.08.2022 16:04, Robin Reckmann wrote:
> Fix i2c transfers using GPI DMA mode for all message types that do not set
> the I2C_M_DMA_SAFE flag (e.g. SMBus "read byte").
>
> In this case a bounce buffer is returned by i2c_get_dma_safe_msg_buf(),
> and it has to synced back to the message after the transfer is done.
>
> Add missing assignment of dma buffer in geni_i2c_gpi().
>
> Set xferred in i2c_put_dma_safe_msg_buf() to true in case of no error to
> ensure the sync-back of this dma buffer to the message.
>
> Signed-off-by: Robin Reckmann <robin.reckmann@gmail.com>
> ---
Makes SM8450 Xperia 1 IV boot with the touchscreen but enabled (previously
it would simply crash), but the touchscreen itself does not work yet (not
yet sure if something is still missing on my part wrt hw setup):

[ 1.838819] gpi 900000.dma-controller: Error in Transaction
[ 1.838944] geni_i2c 990000.i2c: DMA txn failed:3
[ 1.839166] geni_i2c 990000.i2c: GPI transfer failed: -5


Still, this is a very nice improvement.

Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad
> drivers/i2c/busses/i2c-qcom-geni.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index 6ac402ea58fb..d3541e94794e 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -484,12 +484,12 @@ static void geni_i2c_gpi_unmap(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
> {
> if (tx_buf) {
> dma_unmap_single(gi2c->se.dev->parent, tx_addr, msg->len, DMA_TO_DEVICE);
> - i2c_put_dma_safe_msg_buf(tx_buf, msg, false);
> + i2c_put_dma_safe_msg_buf(tx_buf, msg, !gi2c->err);
> }
>
> if (rx_buf) {
> dma_unmap_single(gi2c->se.dev->parent, rx_addr, msg->len, DMA_FROM_DEVICE);
> - i2c_put_dma_safe_msg_buf(rx_buf, msg, false);
> + i2c_put_dma_safe_msg_buf(rx_buf, msg, !gi2c->err);
> }
> }
>
> @@ -553,6 +553,7 @@ static int geni_i2c_gpi(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
> desc->callback_param = gi2c;
>
> dmaengine_submit(desc);
> + *buf = dma_buf;
> *dma_addr_p = addr;
>
> return 0;

\
 
 \ /
  Last update: 2022-08-08 13:47    [W:0.079 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site