lkml.org 
[lkml]   [2022]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 00/33] New thermal OF code
Hi Daniel,

Am 2022-08-08 12:21, schrieb Daniel Lezcano:
> On 08/08/2022 11:42, Michael Walle wrote:
>>> The following changes are depending on:
>>>
>>> - 20220722200007.1839356-1-daniel.lezcano@linexp.org
>>>
>>> which are present in the thermal/linux-next branch:
>>>
>>> https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git/log/?h=thermal/linux-next
>>>
>>> The series introduces a new thermal OF code. The patch description
>>> gives
>>> a detailed explanation of the changes. Basically we write new OF
>>> parsing
>>> functions, we migrate all the users of the old thermal OF API to the
>>> new
>>> one and then we finish by removing the old OF code.
>>>
>>> That is the second step to rework the thermal OF code. More patches
>>> will
>>> come after that to remove the duplication of the trip definitions in
>>> the
>>> different drivers which will result in more code duplication removed
>>> and
>>> consolidation of the core thermal framework.
>>>
>>> Thanks for those who tested the series on their platform and
>>> investigated the regression with the disabled by default thermal
>>> zones.
>> I haven't looked closely yet, but this series is breaking two of my
>> boards.
>>
>> There seems to be one mistake within the new thermal code:
>>
>> [ 2.030452] thermal_sys: Failed to find 'trips' node
>> [ 2.033664] usb 1-1: new high-speed USB device number 2 using
>> xhci-hcd
>> [ 2.035434] thermal_sys: Failed to find trip points for tmu id=2
>> [ 2.048010] qoriq_thermal 1f80000.tmu: Failed to register sensors
>> [ 2.054128] qoriq_thermal: probe of 1f80000.tmu failed with error
>> -22
>> [ 2.060607] devm_thermal_of_zone_release:707 res=ffff002002377180
>> [ 2.067044] Unable to handle kernel paging request at virtual
>> address 01adadadadadad88
>> [ 2.075003] Mem abort info:
>> [ 2.077805] ESR = 0x0000000096000004
>> [ 2.081562] EC = 0x25: DABT (current EL), IL = 32 bits
>> [ 2.086893] SET = 0, FnV = 0
>> [ 2.089955] EA = 0, S1PTW = 0
>> [ 2.093100] FSC = 0x04: level 0 translation fault
>> [ 2.097993] Data abort info:
>> [ 2.100876] ISV = 0, ISS = 0x00000004
>> [ 2.104724] CM = 0, WnR = 0
>> [ 2.107698] [01adadadadadad88] address between user and kernel
>> address ranges
>> [ 2.114863] Internal error: Oops: 96000004 [#1] SMP
>> [ 2.119754] Modules linked in:
>> [ 2.122815] CPU: 1 PID: 1 Comm: swapper/0 Not tainted
>> 5.19.0-next-20220808-00078-ga957a15f74fc-dirty #1694
>> [ 2.132504] Hardware name: Kontron KBox A-230-LS (DT)
>> [ 2.137568] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS
>> BTYPE=--)
>> [ 2.144554] pc : kfree+0x5c/0x3c0
>> [ 2.147885] lr : thermal_of_zone_unregister+0x34/0x54
>> [ 2.152954] sp : ffff80000a22bab0
>> [ 2.156274] x29: ffff80000a22bab0 x28: 0000000000000000 x27:
>> ffff800009960464
>> [ 2.163438] x26: ffff800009a16960 x25: 0000000000000006 x24:
>> ffff800009f09a40
>> [ 2.170601] x23: ffff800009ab9008 x22: ffff800008d0d684 x21:
>> 01adadadadadad80
>> [ 2.177763] x20: 6b6b6b6b6b6b6b6b x19: ffff002002335000 x18:
>> 00000000fffffffb
>> [ 2.184925] x17: ffff800008d0d67c x16: ffff800008d072b4 x15:
>> ffff800008d0c6c4
>> [ 2.192087] x14: ffff800008d0c34c x13: ffff8000088d5034 x12:
>> ffff8000088d46d4
>> [ 2.199248] x11: ffff8000088d4624 x10: 0000000000000000 x9 :
>> ffff800008d0d684
>> [ 2.206410] x8 : ffff002000b1a158 x7 : bbbbbbbbbbbbbbbb x6 :
>> ffff80000a0f53b8
>> [ 2.213572] x5 : ffff80000a22b940 x4 : 0000000000000000 x3 :
>> 0000000000000000
>> [ 2.220733] x2 : fffffc0000000000 x1 : ffff002000838040 x0 :
>> 01adb1adadadad80
>> [ 2.227895] Call trace:
>> [ 2.230342] kfree+0x5c/0x3c0
>> [ 2.233318] thermal_of_zone_unregister+0x34/0x54
>> [ 2.238036] devm_thermal_of_zone_release+0x44/0x54
>> [ 2.242931] release_nodes+0x64/0xd0
>> [ 2.246516] devres_release_all+0xbc/0x350
>> [ 2.250623] device_unbind_cleanup+0x20/0x70
>> [ 2.254905] really_probe+0x1a0/0x2e4
>> [ 2.258577] __driver_probe_device+0x80/0xec
>> [ 2.262859] driver_probe_device+0x44/0x130
>> [ 2.267055] __driver_attach+0x104/0x1b4
>> [ 2.270989] bus_for_each_dev+0x7c/0xe0
>> [ 2.274834] driver_attach+0x30/0x40
>> [ 2.278418] bus_add_driver+0x160/0x210
>> [ 2.281900] hub 1-1:1.0: USB hub found
>> [ 2.282264] driver_register+0x84/0x140
>> [ 2.286109] hub 1-1:1.0: 7 ports detected
>> [ 2.289859] __platform_driver_register+0x34/0x40
>> [ 2.289867] qoriq_tmu_init+0x28/0x34
>> [ 2.302258] do_one_initcall+0x50/0x250
>> [ 2.306104] kernel_init_freeable+0x278/0x31c
>> [ 2.310474] kernel_init+0x30/0x140
>> [ 2.313972] ret_from_fork+0x10/0x20
>> [ 2.317559] Code: b25657e2 d34cfc00 d37ae400 8b020015 (f94006a1)
>> [ 2.323672] ---[ end trace 0000000000000000 ]---
>> [ 2.328317] Kernel panic - not syncing: Attempted to kill init!
>> exitcode=0x0000000b
>> [ 2.335999] SMP: stopping secondary CPUs
>> [ 2.339932] Kernel Offset: disabled
>> [ 2.343425] CPU features: 0x2000,0800f021,00001086
>> [ 2.348229] Memory Limit: none
>> [ 2.351289] ---[ end Kernel panic - not syncing: Attempted to kill
>> init! exitcode=0x0000000b ]---
>>
>> This was seen a sl28 board
>> (arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts).
>> The same board in the KernelCI also have some more information:
>> https://lavalab.kontron.com/scheduler/job/151900#L1162
>>
>> But I guess even if that is fixed, the driver will not probe due to
>> the
>> missing trip points? Are they now mandatory? Does it mean we'd need to
>> update our device trees? But that will then mean older devices trees
>> don't work anymore.
>
> Thanks for reporting, I'll investigate the issues you are reporting.
>
> There is no need to update any device tree file. The code does not
> change the bindings, it is a rewrite of the implementation supposed to
> be without impact on the existing bindings, thus the existing device
> tree descriptions.
>
> Why are you saying there are missing trip points ? The dts shows trip
> points for 'core-cluster' and 'ddr-controller' ?

You are right. I've just looked at the error message:

[ 2.030452] thermal_sys: Failed to find 'trips' node
[ 2.033664] usb 1-1: new high-speed USB device number 2 using
xhci-hcd
[ 2.035434] thermal_sys: Failed to find trip points for tmu id=2

So maybe the code just don't find em.

-michael

\
 
 \ /
  Last update: 2022-08-08 12:56    [W:0.156 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site