lkml.org 
[lkml]   [2022]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] spi: stm32_qspi: use QSPI bus as 8 lines communication channel
Date
From: Patrice Chotard <patrice.chotard@foss.st.com>


The goal of this series is to allow to use QSPI bus as a 8 lines communication
channel for specific purpose.

The QSPI block offers the possibility to communicate with 2 flashes in
parrallel using the dual flash mode, 8 data lines are then used.
A new ST specific property need to be created to enable this dual flash mode.

The addition of the legacy transfer_one_message() spi callback is also needed
as currently the stm32-qspi driver only supports spi_controller_mem_ops API.


Patrice Chotard (3):
dt-bindings: spi: stm32: Add st,dual-flash property in
st,stm32-qspi.yaml
spi: stm32_qspi: Add transfer_one_message() spi callback
ARM: dts: stm32: Create separate pinmux for qspi cs pin in
stm32mp15-pinctrl.dtsi

.../bindings/spi/st,stm32-qspi.yaml | 8 ++
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 50 +++++---
arch/arm/boot/dts/stm32mp157c-ev1.dts | 12 +-
drivers/spi/spi-stm32-qspi.c | 111 ++++++++++++++++--
4 files changed, 155 insertions(+), 26 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2022-08-08 09:42    [W:0.090 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site