lkml.org 
[lkml]   [2022]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 21/26] thermal/drivers/da9062: Use generic thermal_zone_get_trip() function
Date
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/thermal/da9062-thermal.c | 52 +++++---------------------------
1 file changed, 8 insertions(+), 44 deletions(-)

diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
index 180edec34e07..1e163e90d6b6 100644
--- a/drivers/thermal/da9062-thermal.c
+++ b/drivers/thermal/da9062-thermal.c
@@ -120,44 +120,6 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
return IRQ_HANDLED;
}

-static int da9062_thermal_get_trip_type(struct thermal_zone_device *z,
- int trip,
- enum thermal_trip_type *type)
-{
- struct da9062_thermal *thermal = z->devdata;
-
- switch (trip) {
- case 0:
- *type = THERMAL_TRIP_HOT;
- break;
- default:
- dev_err(thermal->dev,
- "Driver does not support more than 1 trip-wire\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int da9062_thermal_get_trip_temp(struct thermal_zone_device *z,
- int trip,
- int *temp)
-{
- struct da9062_thermal *thermal = z->devdata;
-
- switch (trip) {
- case 0:
- *temp = DA9062_MILLI_CELSIUS(125);
- break;
- default:
- dev_err(thermal->dev,
- "Driver does not support more than 1 trip-wire\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
static int da9062_thermal_get_temp(struct thermal_zone_device *z,
int *temp)
{
@@ -172,8 +134,10 @@ static int da9062_thermal_get_temp(struct thermal_zone_device *z,

static struct thermal_zone_device_ops da9062_thermal_ops = {
.get_temp = da9062_thermal_get_temp,
- .get_trip_type = da9062_thermal_get_trip_type,
- .get_trip_temp = da9062_thermal_get_trip_temp,
+};
+
+static struct thermal_trip trips[] = {
+ { .temperature = DA9062_MILLI_CELSIUS(125), .type = THERMAL_TRIP_HOT },
};

static const struct da9062_thermal_config da9062_config = {
@@ -228,10 +192,10 @@ static int da9062_thermal_probe(struct platform_device *pdev)
INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
mutex_init(&thermal->lock);

- thermal->zone = thermal_zone_device_register(thermal->config->name,
- 1, 0, thermal,
- &da9062_thermal_ops, NULL, pp_tmp,
- 0);
+ thermal->zone = thermal_zone_device_register_with_trips(thermal->config->name,
+ trips, ARRAY_SIZE(trips), 0, thermal,
+ &da9062_thermal_ops, NULL, pp_tmp,
+ 0);
if (IS_ERR(thermal->zone)) {
dev_err(&pdev->dev, "Cannot register thermal zone device\n");
ret = PTR_ERR(thermal->zone);
--
2.25.1
\
 
 \ /
  Last update: 2022-08-05 16:59    [W:0.128 / U:0.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site