lkml.org 
[lkml]   [2022]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 3/4] arm64: dts: meson: Add DDR PMU node
From

On 2022/8/5 16:22, Krzysztof Kozlowski wrote:
> [ EXTERNAL EMAIL ]
>
> On 05/08/2022 09:14, Jiucheng Xu wrote:
>> Add DDR PMU device node for G12 series SoC
>>
>> Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
>> ---
>> Changes v3 -> v4:
>> - No change
>>
>> Changes v2 -> v3:
>> - No change
>>
>> Changes v1 -> v2:
>> - Remove model, dmc_nr, chann_nr properties
>> - Add g12a-ddr-pmu, g12b-ddr-pmu, sm1-ddr-pmu compatibles as
>> identifier
>> ---
>> arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 7 +++++++
>> arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 4 ++++
>> arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 4 ++++
>> arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 4 ++++
>> 4 files changed, 19 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> index 45947c1031c4..7e556fe575be 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> @@ -2146,6 +2146,13 @@ hdmi_tx_out: endpoint {
>> };
>> };
>>
>> + ddr_pmu: ddr_pmu@ff638000 {
> No underscores in node names.
>
> Node names should be generic, so pmu.
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Okay, I will modify it.
>
>> + compatible = "amlogic,g12-ddr-pmu";
>> + reg = <0x0 0xff638000 0x0 0x100
>> + 0x0 0xff638c00 0x0 0x100>;
>> + interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
>> + };
>> +
>> gic: interrupt-controller@ffc01000 {
>> compatible = "arm,gic-400";
>> reg = <0x0 0xffc01000 0 0x1000>,
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> index fb0ab27d1f64..4a32e081e70e 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
>> @@ -133,3 +133,7 @@ map1 {
>> };
>> };
>> };
>> +
>> +&ddr_pmu {
>> + compatible = "amlogic,g12a-ddr-pmu";
>> +};
> Adding nodes at the end causes conflicts. They should be added in some
> order...
Is alphabetical order okay?
>
> Best regards,
> Krzysztof
>
--
Thanks,
Jiucheng

\
 
 \ /
  Last update: 2022-08-05 11:58    [W:0.417 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site