lkml.org 
[lkml]   [2022]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5] asus-wmi: Document many of the undocumented API
Date
Signed-off-by: Luke D. Jones <luke@ljones.dev>
---
.../ABI/testing/sysfs-platform-asus-wmi | 50 +++++++++++++++++++
1 file changed, 50 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi
index 04885738cf15..afcaba6c4bfd 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-wmi
+++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi
@@ -57,3 +57,53 @@ Description:
* 0 - default,
* 1 - overboost,
* 2 - silent
+
+What: /sys/devices/platform/<platform>/dgpu_disable
+Date: Dec 2022
+KernelVersion: 5.17
+Contact: "Luke Jones" <luke@ljones.dev>
+Description:
+ Disable discrete GPU:
+ * 0 - Enable dGPU,
+ * 1 - Disable dGPU,
+
+What: /sys/devices/platform/<platform>/egpu_enable
+Date: Dec 2022
+KernelVersion: 5.17
+Contact: "Luke Jones" <luke@ljones.dev>
+Description:
+ Enable the external GPU paired with ROG X-Flow laptops.
+ Toggling this setting will also trigger ACPI to disable the dGPU:
+ * 0 - Disable,
+ * 1 - Enable,
+
+What: /sys/devices/platform/<platform>/keyboard_rgb_mode
+Date: Dec 2022
+KernelVersion: 5.20
+Contact: "Luke Jones" <luke@ljones.dev>
+Description:
+ Set some RGB keyboard modes and features (write-only).
+
+ The accepted input is "save mode speed", where "n n n" options
+ are:
+ * save - 0 or 1, if 0 then settings are not retained on boot
+ * mode - 0 to 12, each is an RGB such as static, rainbow, pulse.
+ Not all keyboards accept every mode.
+ * speed - 0, 1, 2, equal to low, medium, high.
+ Only applies to certain modes.
+
+What: /sys/devices/platform/<platform>/panel_od
+Date: Dec 2022
+KernelVersion: 5.20
+Contact: "Luke Jones" <luke@ljones.dev>
+Description:
+ Set some RGB keyboard power states (write-only).
+
+ The accepted input is "boot awake sleep keyboard", where "n n n n n"
+ options are:
+ * save - 0 or 1, if 0 then settings are not retained on boot
+ * boot - 0 or 1, controls if a boot animation is shown
+ * awake - 0 or 1, controls if the keyboard LED are on during awake
+ * sleep - 0 or 1, controls if a suspended animation is shown.
+ This is only active if the AC is connected.
+ * keyboard - 0 or 1, unknown what effect this really has
--
2.37.1
\
 
 \ /
  Last update: 2022-08-05 10:20    [W:0.231 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site