lkml.org 
[lkml]   [2022]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH 1/8] dt-bindings: remoteproc: qcom: adsp: Make ADSP pil loader as generic
From

Hi,
On 03/08/2022 15:21, Srinivasa Rao Mandadapu wrote:
> Rename sdm845 adsp pil bindings to generic name, for using same binings
> file for subsequent SoCs.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> ---
> .../bindings/remoteproc/qcom,lpass-adsp-pil.yaml | 160 +++++++++++++++++++++
> .../bindings/remoteproc/qcom,sdm845-adsp-pil.yaml | 160 ---------------------
> 2 files changed, 160 insertions(+), 160 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,lpass-adsp-pil.yaml
> delete mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
This should be a rename, I think passing the -M flag to "git format-patch"
detects it.
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,lpass-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,lpass-adsp-pil.yaml
> new file mode 100644
> index 0000000..9f11332
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,lpass-adsp-pil.yaml
> @@ -0,0 +1,160 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,lpass-adsp-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm LPASS ADSP Peripheral Image Loader
> +
> +maintainers:
> + - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description:
> + This document defines the binding for a component that loads and boots firmware
> + on the Qualcomm Technology Inc. ADSP.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,sdm845-adsp-pil
> +
> + reg:
> + maxItems: 1
> + description:
> + The base address and size of the qdsp6ss register
> +
> + interrupts:
> + items:
> + - description: Watchdog interrupt
> + - description: Fatal interrupt
> + - description: Ready interrupt
> + - description: Handover interrupt
> + - description: Stop acknowledge interrupt
> +
> + interrupt-names:
> + items:
> + - const: wdog
> + - const: fatal
> + - const: ready
> + - const: handover
> + - const: stop-ack
> +
> + clocks:
> + items:
> + - description: XO clock
> + - description: SWAY clock
> + - description: LPASS AHBS AON clock
> + - description: LPASS AHBM AON clock
> + - description: QDSP XO clock
> + - description: Q6SP6SS SLEEP clock
> + - description: Q6SP6SS CORE clock
> +
> + clock-names:
> + items:
> + - const: xo
> + - const: sway_cbcr
> + - const: lpass_ahbs_aon_cbcr
> + - const: lpass_ahbm_aon_cbcr
> + - const: qdsp6ss_xo
> + - const: qdsp6ss_sleep
> + - const: qdsp6ss_core
> +
> + power-domains:
> + items:
> + - description: CX power domain
> +
> + resets:
> + items:
> + - description: PDC AUDIO SYNC RESET
> + - description: CC LPASS restart
> +
> + reset-names:
> + items:
> + - const: pdc_sync
> + - const: cc_lpass
> +
> + memory-region:
> + maxItems: 1
> + description: Reference to the reserved-memory for the Hexagon core
> +
> + qcom,halt-regs:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description:
> + Phandle reference to a syscon representing TCSR followed by the
> + three offsets within syscon for q6, modem and nc halt registers.
> +
> + qcom,smem-states:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + description: States used by the AP to signal the Hexagon core
> + items:
> + - description: Stop the modem
> +
> + qcom,smem-state-names:
> + $ref: /schemas/types.yaml#/definitions/string
> + description: The names of the state bits used for SMP2P output
> + items:
> + - const: stop
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-names
> + - clocks
> + - clock-names
> + - power-domains
> + - resets
> + - reset-names
> + - qcom,halt-regs
> + - memory-region
> + - qcom,smem-states
> + - qcom,smem-state-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,rpmh.h>
> + #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> + #include <dt-bindings/clock/qcom,lpass-sdm845.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> + #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> + #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> + remoteproc@17300000 {
> + compatible = "qcom,sdm845-adsp-pil";
> + reg = <0x17300000 0x40c>;
> +
> + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_LPASS_SWAY_CLK>,
> + <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
> + <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
> + <&lpasscc LPASS_QDSP6SS_XO_CLK>,
> + <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
> + <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
> + clock-names = "xo", "sway_cbcr",
> + "lpass_ahbs_aon_cbcr",
> + "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
> + "qdsp6ss_sleep", "qdsp6ss_core";
> +
> + power-domains = <&rpmhpd SDM845_CX>;
> +
> + resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> + <&aoss_reset AOSS_CC_LPASS_RESTART>;
> + reset-names = "pdc_sync", "cc_lpass";
> +
> + qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
> +
> + memory-region = <&pil_adsp_mem>;
> +
> + qcom,smem-states = <&adsp_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> + };
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
> deleted file mode 100644
> index 1535bbb..0000000
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml
> +++ /dev/null
> @@ -1,160 +0,0 @@
> -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/remoteproc/qcom,sdm845-adsp-pil.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: Qualcomm SDM845 ADSP Peripheral Image Loader
> -
> -maintainers:
> - - Bjorn Andersson <bjorn.andersson@linaro.org>
> -
> -description:
> - This document defines the binding for a component that loads and boots firmware
> - on the Qualcomm Technology Inc. ADSP.
> -
> -properties:
> - compatible:
> - enum:
> - - qcom,sdm845-adsp-pil
> -
> - reg:
> - maxItems: 1
> - description:
> - The base address and size of the qdsp6ss register
> -
> - interrupts:
> - items:
> - - description: Watchdog interrupt
> - - description: Fatal interrupt
> - - description: Ready interrupt
> - - description: Handover interrupt
> - - description: Stop acknowledge interrupt
> -
> - interrupt-names:
> - items:
> - - const: wdog
> - - const: fatal
> - - const: ready
> - - const: handover
> - - const: stop-ack
> -
> - clocks:
> - items:
> - - description: XO clock
> - - description: SWAY clock
> - - description: LPASS AHBS AON clock
> - - description: LPASS AHBM AON clock
> - - description: QDSP XO clock
> - - description: Q6SP6SS SLEEP clock
> - - description: Q6SP6SS CORE clock
> -
> - clock-names:
> - items:
> - - const: xo
> - - const: sway_cbcr
> - - const: lpass_ahbs_aon_cbcr
> - - const: lpass_ahbm_aon_cbcr
> - - const: qdsp6ss_xo
> - - const: qdsp6ss_sleep
> - - const: qdsp6ss_core
> -
> - power-domains:
> - items:
> - - description: CX power domain
> -
> - resets:
> - items:
> - - description: PDC AUDIO SYNC RESET
> - - description: CC LPASS restart
> -
> - reset-names:
> - items:
> - - const: pdc_sync
> - - const: cc_lpass
> -
> - memory-region:
> - maxItems: 1
> - description: Reference to the reserved-memory for the Hexagon core
> -
> - qcom,halt-regs:
> - $ref: /schemas/types.yaml#/definitions/phandle-array
> - description:
> - Phandle reference to a syscon representing TCSR followed by the
> - three offsets within syscon for q6, modem and nc halt registers.
> -
> - qcom,smem-states:
> - $ref: /schemas/types.yaml#/definitions/phandle-array
> - description: States used by the AP to signal the Hexagon core
> - items:
> - - description: Stop the modem
> -
> - qcom,smem-state-names:
> - $ref: /schemas/types.yaml#/definitions/string
> - description: The names of the state bits used for SMP2P output
> - items:
> - - const: stop
> -
> -required:
> - - compatible
> - - reg
> - - interrupts
> - - interrupt-names
> - - clocks
> - - clock-names
> - - power-domains
> - - resets
> - - reset-names
> - - qcom,halt-regs
> - - memory-region
> - - qcom,smem-states
> - - qcom,smem-state-names
> -
> -additionalProperties: false
> -
> -examples:
> - - |
> - #include <dt-bindings/interrupt-controller/arm-gic.h>
> - #include <dt-bindings/clock/qcom,rpmh.h>
> - #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> - #include <dt-bindings/clock/qcom,lpass-sdm845.h>
> - #include <dt-bindings/power/qcom-rpmpd.h>
> - #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> - #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> - remoteproc@17300000 {
> - compatible = "qcom,sdm845-adsp-pil";
> - reg = <0x17300000 0x40c>;
> -
> - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
> - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "wdog", "fatal", "ready",
> - "handover", "stop-ack";
> -
> - clocks = <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_LPASS_SWAY_CLK>,
> - <&lpasscc LPASS_Q6SS_AHBS_AON_CLK>,
> - <&lpasscc LPASS_Q6SS_AHBM_AON_CLK>,
> - <&lpasscc LPASS_QDSP6SS_XO_CLK>,
> - <&lpasscc LPASS_QDSP6SS_SLEEP_CLK>,
> - <&lpasscc LPASS_QDSP6SS_CORE_CLK>;
> - clock-names = "xo", "sway_cbcr",
> - "lpass_ahbs_aon_cbcr",
> - "lpass_ahbm_aon_cbcr", "qdsp6ss_xo",
> - "qdsp6ss_sleep", "qdsp6ss_core";
> -
> - power-domains = <&rpmhpd SDM845_CX>;
> -
> - resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
> - <&aoss_reset AOSS_CC_LPASS_RESTART>;
> - reset-names = "pdc_sync", "cc_lpass";
> -
> - qcom,halt-regs = <&tcsr_mutex_regs 0x22000>;
> -
> - memory-region = <&pil_adsp_mem>;
> -
> - qcom,smem-states = <&adsp_smp2p_out 0>;
> - qcom,smem-state-names = "stop";
> - };
> --
> 2.7.4
>

--
Kind Regards,
Caleb (they/he)

\
 
 \ /
  Last update: 2022-08-04 21:49    [W:0.414 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site