lkml.org 
[lkml]   [2022]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] dma/pool: do not complain if DMA pool is not allocated
On Thu 04-08-22 19:01:28, Baoquan He wrote:
> On 08/03/22 at 05:44pm, Michal Hocko wrote:
> > On Wed 03-08-22 23:32:03, Baoquan He wrote:
> > > On 08/03/22 at 05:05pm, Michal Hocko wrote:
> > > > On Wed 03-08-22 22:59:26, Baoquan He wrote:
> > > > > On 08/03/22 at 11:52am, Michal Hocko wrote:
> > > > > > On Fri 25-03-22 17:54:33, Michal Hocko wrote:
> > > > > > > On Fri 25-03-22 17:48:56, Christoph Hellwig wrote:
> > > > > > > > On Fri, Mar 25, 2022 at 01:58:42PM +0100, Michal Hocko wrote:
> > > > > > > > > Dang, I have just realized that I have misread the boot log and it has
> > > > > > > > > turned out that a674e48c5443 is covering my situation because the
> > > > > > > > > allocation failure message says:
> > > > > > > > >
> > > > > > > > > Node 0 DMA free:0kB boost:0kB min:0kB low:0kB high:0kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:636kB managed:0kB mlocked:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
> > > > > > > >
> > > > > > > > As in your report is from a kernel that does not have a674e48c5443
> > > > > > > > yet?
> > > > > > >
> > > > > > > yes. I just mixed up the early boot messages and thought that DMA zone
> > > > > > > ended up with a single page. That message was saying something else
> > > > > > > though.
> > > > > >
> > > > > > OK, so I have another machine spewing this warning. Still on an older
> > > > > > kernel but I do not think the current upstream would be any different in
> > > > > > that regards. This time the DMA zone is populated and consumed from
> > > > > > large part and the pool size request is just too large for it:
> > > > > >
> > > > > > [ 14.017417][ T1] swapper/0: page allocation failure: order:10, mode:0xcc1(GFP_KERNEL|GFP_DMA), nodemask=(null),cpuset=/,mems_allowed=0-7
> > > > > > [ 14.017429][ T1] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.14.21-150400.22-default #1 SLE15-SP4 0b6a6578ade2de5c4a0b916095dff44f76ef1704
> > > > > > [ 14.017434][ T1] Hardware name: XXXX
> > > > > > [ 14.017437][ T1] Call Trace:
> > > > > > [ 14.017444][ T1] <TASK>
> > > > > > [ 14.017449][ T1] dump_stack_lvl+0x45/0x57
> > > > > > [ 14.017469][ T1] warn_alloc+0xfe/0x160
> > > > > > [ 14.017490][ T1] __alloc_pages_slowpath.constprop.112+0xc27/0xc60
> > > > > > [ 14.017497][ T1] ? rdinit_setup+0x2b/0x2b
> > > > > > [ 14.017509][ T1] ? rdinit_setup+0x2b/0x2b
> > > > > > [ 14.017512][ T1] __alloc_pages+0x2d5/0x320
> > > > > > [ 14.017517][ T1] alloc_page_interleave+0xf/0x70
> > > > > > [ 14.017531][ T1] atomic_pool_expand+0x4a/0x200
> > > > > > [ 14.017541][ T1] ? rdinit_setup+0x2b/0x2b
> > > > > > [ 14.017544][ T1] __dma_atomic_pool_init+0x44/0x90
> > > > > > [ 14.017556][ T1] dma_atomic_pool_init+0xad/0x13f
> > > > > > [ 14.017560][ T1] ? __dma_atomic_pool_init+0x90/0x90
> > > > > > [ 14.017562][ T1] do_one_initcall+0x41/0x200
> > > > > > [ 14.017581][ T1] kernel_init_freeable+0x236/0x298
> > > > > > [ 14.017589][ T1] ? rest_init+0xd0/0xd0
> > > > > > [ 14.017596][ T1] kernel_init+0x16/0x120
> > > > > > [ 14.017599][ T1] ret_from_fork+0x22/0x30
> > > > > > [ 14.017604][ T1] </TASK>
> > > > > > [...]
> > > > > > [ 14.018026][ T1] Node 0 DMA free:160kB boost:0kB min:0kB low:0kB high:0kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15996kB managed:15360kB mlocked:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
> > > > > > [ 14.018035][ T1] lowmem_reserve[]: 0 0 0 0 0
> > > > > > [ 14.018339][ T1] Node 0 DMA: 0*4kB 0*8kB 0*16kB 1*32kB (U) 0*64kB 1*128kB (U) 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 160kB
> > > > > >
> > > > > > So the DMA zone has only 160kB free while the pool would like to use 4MB
> > > > > > of it which obviously fails. I haven't tried to check who is consuming
> > > > > > the DMA zone memory and why but this shouldn't be all that important
> > > > > > because the pool clearly cannot allocate and there is not much the
> > > > > > user/admin can do about that. Well, the pool could be explicitly
> > > > > > requested smaller but is that really what we expect them to do?
> > > > > >
> > > > > > > > > I thought there are only few pages in the managed by the DMA zone. This
> > > > > > > > > is still theoretically possible so I think __GFP_NOWARN makes sense here
> > > > > > > > > but it would require to change the patch description.
> > > > > > > > >
> > > > > > > > > Is this really worth it?
> > > > > > > >
> > > > > > > > In general I think for kernels where we need the pool and can't allocate
> > > > > > > > it, a warning is very useful. We just shouldn't spew it when there is
> > > > > > > > no need for the pool to start with.
> > > > > > >
> > > > > > > Well, do we have any way to find that out during early boot?
> > > > > >
> > > > > > Thinking about it. We should get a warning when the actual allocation
> > > > > > from the pool fails no? That would be more useful information than the
> > > > > > pre-allocation failure when it is not really clear whether anybody is
> > > > > > ever going to consume it.
> > > > >
> > > > > Hi Michal,
> > > > >
> > > > > You haven't told on which ARCH you met this issue, is it x86_64?
> > > >
> > > > yes x86_64, so a small 16MB DMA zone.
> > >
> > > Yeah, the 16M DMA zone is redicilous and exists only for hardly seen
> > > ISA-style devices support. Haven't prepared the log well.
> >
> > Agreed on that! I would essentially suggest to completely ignore pool
> > pre-allocation failures for the small DMA zone. There is barely anything
> > to be ever consuming it.
>
> I would personally suggest to keep it. W/o that, we even don't know the
> issue we are talking about now. I see below commit as a workaround, and
> have been trying to fix it finally with a better solution.
>
> commit c4dc63f0032c ("mm/page_alloc.c: do not warn allocation failure on zone DMA if no managed pages")

This will not help in any case but an empty DMA zone. As you can see
this is not the case in my example.

> After attempts, I realize it's time to let one zone DMA or DMA32 cover
> the whole low 4G memory on x86_64. That's the real fix. The tiny 16M DMA
> on 64bit system is root cause.

Yes, I would agree with that. This means DMA zone is gone completely.

[...]
> > This also mostly papers over this particular problem by allocating
> > allocating two pools for the same range.
>
> No, it doesn't paper over anything, and isn't a hack. Zone dma now covers
> low 4G, just zone DMA32 is empty. Any allocation request with GFP_DMA will
> be satisfied, while request with GFP_DMA32 will fall back to zone DMA.

This is breaking expectation of the DMA zone on x86. This is not
acceptable. You really want to do it other way around. Only have DMA32
zone and cover the whole 32b phys address range. DMA zone would be empty
which is something we can have already. This would make the crap HW fail
on allocations.

> See my summary about zone DMA/DMA32 on ARCHes. Currently only x86_64
> always has this burdensome tiny DMA zone. Other ARCH has made adjustment
> to avoid that conditionally. The way I took in above patch is similar
> with arm64 handling.

Yeah a historical baggage we have to live with or just stop pretending
we really do support that ISA HW. Or make that dynamic and only set up
DMA zone when there is a HW like that present.

> The two pools for the same range has been there on arm64 and mips, we
> can easily fix it by introducing has_managed_dma32() and checking it
> before allocating atomic_pool_dma32 pool, just like I have done for
> atomic_pool_dma there.
>
> =============================
> ARCH which has DMA32
> ZONE_DMA ZONE_DMA32
> arm64 0~X empty or X~4G (X is got from ACPI or DT. Otherwise it's 4G by default, DMA32 is empty)
> ia64 None 0~4G
> mips empty or 0~16M X~4G (zone DMA is empty on SGI_IP22 or SGI_IP28, otherwise 16M by default like i386)
> riscv None 0~4G
> x86_64 16M 16M~4G
> =============================
>
>
> As for the only one DMA or DMA32 zone exist on x86_64 you suggested, I
> made below draft change which only creates zone DMA32 to cover the whole
> low 4G meomry, just like RISC-V and ia64 are doing. It works well on
> one intel machine, no other change is required. However, I have one
> concern, it possibly comes from my own misunderstanding, please help
> point out where I got it wrong. If there's only DMA32 zone, and
> CONFIG_ZONE_DMA is disabled, how does it handle GFP_DMA allocation
> request?

the expected behavior should be to fail the allocation.

> See gfp_zone(), it will return ZONE_NORMAL to user even though
> user expects to get memory for DMA handling?

It's been quite some time since I've had gfp_zone cached in my brain. I
suspect it would require some special casing for GFP_DMA to always fail.
I would have to study the code again. We have discussed this at some
LSFMM few years back. Maybe you can find something at lwn.

In any case. This is a larger change. Do you agree that the warning is
pointless and __GFP_NOWARN is a very simple way to deal with it until we
sort out situation of the DMA zone on x86 which is a long standing
problem?
--
Michal Hocko
SUSE Labs

\
 
 \ /
  Last update: 2022-08-04 14:02    [W:0.109 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site