lkml.org 
[lkml]   [2022]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 net-next 1/3] ptp: Add adjphase function to support phase offset control.
From


On 5/2/2020 6:35 AM, vincent.cheng.xh@renesas.com wrote:
> From: Vincent Cheng <vincent.cheng.xh@renesas.com>
>
> Adds adjust phase function to take advantage of a PHC
> clock's hardware filtering capability that uses phase offset
> control word instead of frequency offset control word.
>
> Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
> ---
> drivers/ptp/ptp_clock.c | 3 +++
> include/linux/ptp_clock_kernel.h | 6 +++++-
> 2 files changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c
> index acabbe7..fc984a8 100644
> --- a/drivers/ptp/ptp_clock.c
> +++ b/drivers/ptp/ptp_clock.c
> @@ -146,6 +146,9 @@ static int ptp_clock_adjtime(struct posix_clock *pc, struct __kernel_timex *tx)
> else
> err = ops->adjfreq(ops, ppb);
> ptp->dialed_frequency = tx->freq;
> + } else if (tx->modes & ADJ_OFFSET) {
> + if (ops->adjphase)
> + err = ops->adjphase(ops, tx->offset);
> } else if (tx->modes == 0) {
> tx->freq = ptp->dialed_frequency;
> err = 0;
> diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h
> index 121a7ed..31144d9 100644
> --- a/include/linux/ptp_clock_kernel.h
> +++ b/include/linux/ptp_clock_kernel.h
> @@ -36,7 +36,7 @@ struct ptp_system_timestamp {
> };
>
> /**
> - * struct ptp_clock_info - decribes a PTP hardware clock
> + * struct ptp_clock_info - describes a PTP hardware clock
> *
> * @owner: The clock driver should set to THIS_MODULE.
> * @name: A short "friendly name" to identify the clock and to
> @@ -65,6 +65,9 @@ struct ptp_system_timestamp {
> * parameter delta: Desired frequency offset from nominal frequency
> * in parts per billion
> *
> + * @adjphase: Adjusts the phase offset of the hardware clock.
> + * parameter delta: Desired change in nanoseconds.
> + *
> * @adjtime: Shifts the time of the hardware clock.
> * parameter delta: Desired change in nanoseconds.
> *
> @@ -128,6 +131,7 @@ struct ptp_clock_info {
> struct ptp_pin_desc *pin_config;
> int (*adjfine)(struct ptp_clock_info *ptp, long scaled_ppm);
> int (*adjfreq)(struct ptp_clock_info *ptp, s32 delta);
> + int (*adjphase)(struct ptp_clock_info *ptp, s32 phase);
Hi,

Please explain the difference in the output between adjphase and
adjtime. I'd expect both to add delta to current time. Am I missing
something?

Thanks,
Aya
> int (*adjtime)(struct ptp_clock_info *ptp, s64 delta);
> int (*gettime64)(struct ptp_clock_info *ptp, struct timespec64 *ts);
> int (*gettimex64)(struct ptp_clock_info *ptp, struct timespec64 *ts,

\
 
 \ /
  Last update: 2022-08-04 13:41    [W:0.077 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site