lkml.org 
[lkml]   [2022]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: 回复: [PATCH V1 1/1] mmc:sdhci:Fix t he SD tuning CMD parameter issue that the SDHCI TRANSFER MODE is cleared from read direction to write direction incorrectly
From
On 31/08/22 15:04, Chevron Li (WH) wrote:
> Hi, Adrian,
>
> Sorry response you so late.
>
> Does your comment "mmc_op_tuning() could be used here" means that we should use mmc_send_tuning() instead of sdhci_send_tuning?

I just meant, instead of:

- if (cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)
+ if ((cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
+ (cmd->opcode != MMC_SEND_TUNING_BLOCK))

this is simpler:

- if (cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)
+ if (!mmc_op_tuning(cmd->opcode))


>
> If yes, I think we need add below patch commit by Charl Liu for those reasons:
> 1.Bayhub host tuning command does not have a data payload and our hardware does it automatically, so mmc_send_tuning() will return -EIO.
> 2.Bayhub host can be used for both SD and eMMC cards.
> 3.Both MMC_SEND_TUNING_BLOCK and MMC_SEND_TUNING_BLOCK_HS200 are tuning command opcode, maybe the same logical at here is better?
>
> BR,
> Chevron
>
> -----邮件原件-----
> 发件人: Adrian Hunter <adrian.hunter@intel.com>
> 发送时间: Sunday, July 24, 2022 15:22
> 收件人: Charl Liu (WH) <charl.liu@bayhubtech.com>; ulf.hansson@linaro.org; linux-mmc@vger.kernel.org; linux-kernel@vger.kernel.org
> 抄送: Shaper Liu (WH) <shaper.liu@bayhubtech.com>; Chevron Li (WH) <chevron.li@bayhubtech.com>; Thomas Hu(WH) <thomas.hu@bayhubtech.com>; XiaoGuang Yu (WH) <xiaoguang.yu@bayhubtech.com>; Shirley Her(SC) <shirley.her@bayhubtech.com>
> 主题: Re: [PATCH V1 1/1] mmc:sdhci:Fix the SD tuning CMD parameter issue that the SDHCI_TRANSFER_MODE is cleared from read direction to write direction incorrectly
>
> On 20/07/22 15:37, Charl Liu wrote:
>> When cmd->opcode == MMC_SEND_TUNING_BLOCK, the SDHCI_TRANSFER_MODE
>> should also be kept
>>
>> Signed-off-by: Charl Liu <charl.liu@bayhubtech.com>
>> ---
>> Change in V1:
>> Keeping the SDHCI_TRANSFER_MODE when cmd->opcode == MMC_END_TUNING_
>> BLOCK
>> ---
>> drivers/mmc/host/sdhci.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index
>> 22152029e14c..6a0f6725dadb 100644
>> --- a/drivers/mmc/host/sdhci.c
>> +++ b/drivers/mmc/host/sdhci.c
>> @@ -1430,7 +1430,8 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
>> if (host->quirks2 &
>> SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
>> /* must not clear SDHCI_TRANSFER_MODE when tuning */
>> - if (cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)
>> + if ((cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) &&
>> + (cmd->opcode != MMC_SEND_TUNING_BLOCK))
>
> mmc_op_tuning() could be used here
>
>> sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
>> } else {
>> /* clear Auto CMD settings for no data CMDs */
>

\
 
 \ /
  Last update: 2022-08-31 15:50    [W:0.191 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site