lkml.org 
[lkml]   [2022]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RESEND PATCH v2 1/5] dt-bindings: firmware: qcom-scm: Add "allow-multi-call" property
From
On 31/08/2022 01:25, Guru Das Srinagesh wrote:
> For firmware that supports it, allow multiple SCM calls to be passed
> down to it by removing the serialization lock in the SCM driver.
>
> This patch is based on this YAML conversion patch [1] that is in-flight
> currently.
>
> [1] https://lore.kernel.org/lkml/20220708090431.30437-1-david@ixit.cz/
>
> Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>

Thank you for your patch. There is something to discuss/improve.

If you make a resend, at least be sure you Cc proper people. Use
scripts/get_maintainers.pl to CC all maintainers and relevant mailing lists.

This was not Cced to device tree maintainers, therefore it has to be NAK-ed.


> ---
> Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> index 9fdeee0..e279fd2 100644
> --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
> @@ -70,6 +70,11 @@ properties:
> '#reset-cells':
> const: 1
>
> + allow-multi-call:
> + description:
> + Specify this flag to remove SCM call serialization. Need to ensure that
> + the firmware being used supports this feature first.

Missing vendor prefix, missing type.

Isn't support for this obvious from compatible?\

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-08-31 10:00    [W:0.531 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site