lkml.org 
[lkml]   [2022]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: marvell: 98dx25xx: use correct property for i2c gpios
Date
Use the correct names for scl-gpios and sda-gpios so that the generic
i2c recovery code will find them. While we're here set the
GPIO_OPEN_DRAIN flag on the gpios.

Fixes: b795fadfc46b ("arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 80b44c7df56a..881bf948d1df 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -117,8 +117,8 @@ i2c0: i2c@11000{
pinctrl-names = "default", "gpio";
pinctrl-0 = <&i2c0_pins>;
pinctrl-1 = <&i2c0_gpio>;
- scl_gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>;
- sda_gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio0 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};

@@ -136,8 +136,8 @@ i2c1: i2c@11100{
pinctrl-names = "default", "gpio";
pinctrl-0 = <&i2c1_pins>;
pinctrl-1 = <&i2c1_gpio>;
- scl_gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;
- sda_gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio0 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio0 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
};

--
2.37.2
\
 
 \ /
  Last update: 2022-09-01 04:29    [W:0.056 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site