lkml.org 
[lkml]   [2022]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v5 3/7] arm64: dts: imx8mp-evk: Add PCIe support
Date
> -----Original Message-----
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Sent: 2022年8月31日 18:18
> To: vkoul@kernel.org; richard.leitner@linux.dev;
> alexander.stein@ew.tq-group.com; robh@kernel.org; l.stach@pengutronix.de;
> shawnguo@kernel.org; lorenzo.pieralisi@arm.com; p.zabel@pengutronix.de;
> Hongxing Zhu <hongxing.zhu@nxp.com>; bhelgaas@google.com;
> marex@denx.de
> Cc: linux-phy@lists.infradead.org; linux-pci@vger.kernel.org;
> kernel@pengutronix.de; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; dl-linux-imx <linux-imx@nxp.com>;
> linux-arm-kernel@lists.infradead.org
> Subject: Re: [PATCH v5 3/7] arm64: dts: imx8mp-evk: Add PCIe support
>
> On Tue, 2022-08-30 at 15:46 +0800, Richard Zhu wrote:
> > Add PCIe support on i.MX8MP EVK board.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> > Tested-by: Marek Vasut <marex@denx.de>
> > Tested-by: Richard Leitner <richard.leitner@skidata.com>
> > Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 53
> > ++++++++++++++++++++
> >  1 file changed, 53 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > index f6b017ab5f53..defc92a8bb60 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > @@ -5,6 +5,7 @@
> >
> >  /dts-v1/;
> >
> > +#include <dt-bindings/phy/phy-imx8-pcie.h>
> >  #include "imx8mp.dtsi"
> >
> >  / {
> > @@ -33,6 +34,12 @@ memory@40000000 {
> >                       <0x1 0x00000000 0 0xc0000000>;
> >         };
> >
> > +       pcie0_refclk: pcie0-refclk {
> > +               compatible = "fixed-clock";
> > +                       #clock-cells = <0>;
> > +                       clock-frequency = <100000000>;
> > +       };
> > +
> >         reg_can1_stby: regulator-can1-stby {
> >                 compatible = "regulator-fixed";
> >                 regulator-name = "can1-stby"; @@ -55,6 +62,17
> @@
> > reg_can2_stby: regulator-can2-stby {
> >                 enable-active-high;
> >         };
> >
> > +       reg_pcie0: regulator-pcie {
> > +               compatible = "regulator-fixed";
> > +               pinctrl-names = "default";
> > +               pinctrl-0 = <&pinctrl_pcie0_reg>;
> > +               regulator-name = "MPCIE_3V3";
> > +               regulator-min-microvolt = <3300000>;
> > +               regulator-max-microvolt = <3300000>;
> > +               gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
> > +               enable-active-high;
> > +       };
> > +
> >         reg_usdhc2_vmmc: regulator-usdhc2 {
> >                 compatible = "regulator-fixed";
> >                 pinctrl-names = "default"; @@ -350,6 +368,28 @@
> &i2c5
> > {
> >          */
> >  };
> >
> > +&pcie_phy {
> > +       fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> > +       clocks = <&pcie0_refclk>;
> > +       clock-names = "ref";
> > +       status = "okay";
> > +};
> > +
> > +&pcie{
>
> Missing space before that curly brace.
>
Good caught. Would be changed later, thanks.

Best Regards
Richard Zhu

> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&pinctrl_pcie0>;
> > +       reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
> > +       clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
> > +                <&clk IMX8MP_CLK_PCIE_ROOT>,
> > +                <&clk IMX8MP_CLK_HSIO_AXI>;
> > +       clock-names = "pcie", "pcie_aux", "pcie_bus";
> > +       assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
> > +       assigned-clock-rates = <10000000>;
> > +       assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
> > +       vpcie-supply = <&reg_pcie0>;
> > +       status = "okay";
> > +};
> > +
> >  &snvs_pwrkey {
> >         status = "okay";
> >  };
> > @@ -502,6 +542,19 @@
> MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL
> > 0x400001c2
> >                 >;
> >         };
> >
> > +       pinctrl_pcie0: pcie0grp {
> > +               fsl,pins = <
> >
> +                       MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKRE
> Q_B    0x61
> > +/* open drain, pull up */
> >
> +                       MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO
> 07      0x41
> > +               >;
> > +       };
> > +
> > +       pinctrl_pcie0_reg: pcie0reggrp {
> > +               fsl,pins = <
> >
> +                       MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO
> 06      0x41
> > +               >;
> > +       };
> > +
> >         pinctrl_pmic: pmicgrp {
> >                 fsl,pins = <
> >                         MX8MP_IOMUXC_GPIO1_IO03__GPIO1
> _IO03
> > 0x000001c0
\
 
 \ /
  Last update: 2022-09-01 03:29    [W:0.065 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site